CubeCell: verschil tussen versies
Uit RevSpace
Geen bewerkingssamenvatting |
|||
| Regel 9: | Regel 9: | ||
== Intro == | == Intro == | ||
This page is about the [https://heltec.org/project/htcc-ab01/ CubeCell board] from heltec.org, aka HTCC-AB01 | This page is about the [https://heltec.org/project/htcc-ab01/ CubeCell board] from [https://nl.aliexpress.com/store/3213115 heltec.org], aka HTCC-AB01 | ||
* based on an ASR605x (ARM cortex M0+ core) + SX1262(?) radio chip | * based on an ASR605x (ARM cortex M0+ core) + SX1262(?) radio chip | ||
* low power, only microamps sleep current | * low power, only microamps sleep current | ||
Versie van 7 jun 2020 15:48
| Project CubeCell | |
|---|---|
| |
| Low-power LoRaWAN Board | |
| Status | In progress |
| Contact | bertrik |
| Last Update | 2020-06-07 |
Intro
This page is about the CubeCell board from heltec.org, aka HTCC-AB01
- based on an ASR605x (ARM cortex M0+ core) + SX1262(?) radio chip
- low power, only microamps sleep current
- battery connection
- solar cell connection
the github page for the Arduino code
What I'd like to investigate:
- Does it have an RTC?
- Can we run the arduino-lmic library on this? This should be possible because arduino-lmic is also targeted to a sx12x2 core.
- Can we compile the code with platformio? YES
https://github.com/HelTecAutomation/ASR650x-Arduino/issues/11 https://github.com/platformio/platformio-core/issues/3078
- Use this board for my LoraBatBox
- Video review by Andreas Spiess
- pinout
Hardware
Software
A demo project is available at https://github.com/bertrik/cubecelldemo
