Trimbleacutime: verschil tussen versies
Uit RevSpace
kGeen bewerkingssamenvatting |
kGeen bewerkingssamenvatting |
||
| Regel 4: | Regel 4: | ||
|Picture=Azimutalprojektion.jpg | |Picture=Azimutalprojektion.jpg | ||
|Omschrijving=Just putting some info out there about these old gps timing modules | |Omschrijving=Just putting some info out there about these old gps timing modules | ||
|Status=Completed | |Status= Completed | ||
|Contact=thomas | |Contact=thomas | ||
}} | }} | ||
Versie van 22 feb 2019 16:31
| Project Trimble Acutime 2000 | |
|---|---|
| |
| Just putting some info out there about these old gps timing modules | |
| Status | Completed |
| Contact | thomas |
| Last Update | 2019-02-22 |
Pin-out
I had some trouble figuring out how to connect one of these old receiver units to its interface box. The pinout turns out to be identical to the older Palisade units! I've listed the connections below, maybe it will solve someone else the trouble of plowing through endless documentation.
| DB-25M | Acutime | Description |
|---|---|---|
| 1 | 1 | Power |
| 7 | 9 | Ground |
| 9 | 12 | PPS- |
| 10 | 8 | Transmit Port A (T-) |
| 11 | 4 | Transmit Port B (T-) |
| 12 | 7 | Receive Port A (R+) |
| 13 | 3 | Receive Port B (R+) |
| 21 | 11 | PPS + |
| 22 | 10 | Transmit Port A (T+) |
| 23 | 5 | Transmit Port B (T+) |
| 24 | 6 | Receive Port A (R-) |
| 25 | 2 | Receive Port B (R-) |
- Acutime pin numbers are those listed in the Trimble manual.
