RevSpace - User contributions [en-gb]

OpenDag2026

2026-02-22T18:44:15Z

Wheeze NL: /* Aanwezigen */

{{Event
|Name=OpenDag2026
|DateStart=28 March 2026
|DateEnd=28 March 2026
|InfoLocation=RevSpace
|InfoOpen=11:00
}}
{{NewsItem
|Name=Jaarlijkse open Hackerspaces dag (2026)
|Date=2026-03-28
|Info=''Op zaterdag 28 maart kan iedereen weer vrij binnenlopen in een hackerspace. Tijdens deze open dag is het mogelijk om te zien wat bijvoorbeeld hacken inhoudt en te zien wat er allemaal kan in een hackerspace.''

}}

==Ticketshop==
Hier komt de ticketshoplink.

==Flyer==

== Organisatie ==

Landelijk ingegeven via: https://hackerspaces.nl/open-dag/

RevSpace doet uiteraard ook mee.

=== Aanwezigen ===

Om zeker te weten dat we met genoeg mensen zijn, een lijstje van revspacers die hebben toegezegd te komen om bezoekers te ontvangen:

{|class=wikitable
! Naam !! Van-tot !! Opmerkingen
|-
| Atoomnet || vroeg - laat || Aanwezig met vast iets leuks om te solderen of te bewonderen
|-
| Crashjuh || vroeg - laat || Rondleiden, 3D Printen, misschien iets met radio communicatie
|-
| Wheeze_NL || 14:00 - laat || Aanwezig, Rondleiden?
|-
| Jij? || 11.00 - laat || Rondleiden, lasercutten, algemeen knutselen
|-
|}

=== Promotie ===
* Wie contacteert welke krant/influencer/etc? Wie flyert in welke wijk/locatie/etc?
* Jij doet??

=== Activiteiten ===
* Rondleidingen langs onze werkplaatsen, apparatuur en projecten.
* Op verzoek: demonstratie van apparatuur zoals lasersnijder, 3D-printer, foliesnijder, oscilloscoop, etc...
* Sleutelhanger maken/graveren met de lasersnijder

39C3 Tickets

2025-12-09T01:08:00Z

Wheeze NL: /* Revspace Participants */

{{Project
|Name=39C3 Tickets
|Status=Initializing
|Contact=Board
}}

* https://events.ccc.de/en/2025/10/16/39c3-presale-modus-operandi/
* https://events.ccc.de/congress/2025/infos/startpage.html
* https://tickets.events.ccc.de/39c3/

Open sale after voucher phase:
* 2025-11-08, Saturday, 11:00 Uhr (CET)
* 2025-11-17, Monday, 20:00 Uhr (CET)

== Status ==

* We have received 7+1+2+2 replicating vouchers, and 2 non-replicating vouchers, and have used those to order '''55''' tickets.
* We've reached the end of the list 🎉.
* '''The Community Phase of the presale is over and our vouchers are not valid anymore.'''
* <s>We currently have '''4''' unused voucher(s) available.</s>
* The ticket emails have been received from the CCC.
* '''The ticket PDFs have been emailed to RevSpace participants.''' If you as a participant ordered a ticket (for yourself or a friend), check your mailbox. Didn't get the mail? Contact us ASAP. If you ordered a ticket as a friend of a RevSpace participant, ask your friend to forward your ticket to you; we will not send them directly.

A log of datetimes, because everyone's asking when things will happen. We don't know, we haven't figured out the logic yet.

(Times intentionally obfuscated.)

* 2025-10-17 4:xx - confirmed group info for 39c3 presale
* 2025-10-21 0:xx - received initial vouchers
* 2025-10-21 0:xx - orders placed
* 2025-10-21 2:xx - payments confirmed by CCC
* 2025-10-22 23:xx - received replicated vouchers
* 2025-10-22 23:xx - orders placed
* 2025-10-23 2:xx - payment confirmed by CCC
* 2025-10-24 22:xx - received replicated vouchers
* 2025-10-24 23:xx - orders placed
* 2025-10-25 nothing (Saturday)
* 2025-10-26 nothing (Sunday)
* 2025-10-27 1:xx - payment confirmed by CCC
* 2025-10-27 7:xx - payment confirmed by CCC
* 2025-10-27 22:xx - received replicated vouchers
* 2025-10-27 22:xx - orders placed
* 2025-10-28 1:xx - payments confirmed by CCC
* 2025-10-28 14:xx - got an additional voucher from a friendly hackerspace and ordered one more ticket
* 2025-10-28 14:xx - payment confirmed by CCC
* 2025-10-29 22:xx - received replicated vouchers
* 2025-10-29 22:xx - orders placed
* 2025-10-29 23:xx - got 2 additional vouchers from a friendly hackerspace and ordered two more tickets
* 2025-10-29 1:xx - payments confirmed by CCC
* 2025-10-30 11:xx - got 2 additional vouchers from a friendly hackerspace and ordered two more tickets
* 2025-10-30 11:xx - payment confirmed by CCC
* 2025-10-30 22:xx - got an additional voucher from a friendly individual and ordered one more ticket
* 2025-10-31 1:xx - payment confirmed by CCC
* 2025-10-31 21:xx - received replicated vouchers
* 2025-10-31 22:xx - orders placed
* 2025-10-31 23:xx - gave 2 vouchers to another hackerspace
* 2025-10-31 23:xx - order placed
* 2025-10-31 23:xx - got an additional voucher from a friendly hackerspace
* 2025-11-01 11:xx - ordered one more ticket.
* 2025-11-02 nothing (Sunday)
* 2025-11-03 1:xx - payments confirmed by CCC
* 2025-11-03 22:xx - received replicated vouchers
* 2025-11-03 22:xx - ordered one more ticket.
* 2025-11-03 23:xx - ordered one more ticket.
* 2025-11-03 23:xx - gave 5 vouchers to individuals
* 2025-11-04 1:xx - payments confirmed by CCC
* 2025-11-04 ?:xx - voucher phase is over
* 2025-12-07 14-15:xx - tickets received from CCC
* 2025-12-07 23:xx - tickets sent to participants

== Tickets ==

<s>To buy a ticket through RevSpace,

# Append your entry to the appropriate table below. One row per ticket. "+1" etc. will be removed, because the voucher workflow can't accommodate that. Add your +1 to the "Friends" table instead; again, one row per ticket.
#* Keep the "Money received" and "Ticket ordered" columns to "No". A RevSpace board member will update these.
# Pay the '''exact and [https://tickets.events.ccc.de/39c3/ correct] amount''' to NL18ABNA0887700780 of <tt>Revelation Space</tt>, with your nickname and the text "39c3 ticket" in the description field.
#* If the amount is not enough, we will not order your ticket. If it is too much, we will keep the rest as a donation.
#* Note: this is a different account than for your monthly contribution, and it is also completely unrelated to RevBank.
#* If you find out that you made a mistake, like if you forgot your name in the description, please contact board@revspace.nl
# We will '''try''' to buy a ticket on your behalf on the 39C3 ticket site, pay the money to the CCC IBAN, and wait for the next round of vouchers.
# First come, first served, but only if you have added your entry to the table AND paid the exact and correct amount.
# RevSpace participants get precedence over friends, one ticket per participant.
# If a participants has many friends who want tickets, we will arbitrarily give priority to other friends of other participants to keep things somewhat fair :)
</s>
# After the tickets are distributed by the CCC (shortly before the event), we will send it to your email address known to us.
# If we couldn't buy your ticket during the voucher phase, we will return the money to the same IBAN it came from. Don't cancel your bank account during these weeks :)

==== Revspace Participants ====
{|class=wikitable
|-
! Name !! Ticket type (Standard, Supporter, CCC member) || Money received || Ticket ordered || Mode de transport || Assembly
|-
| Chris_ty || Standard || Yes || Yes || Train || ?
|-
| Peetz0r || Standard || Yes || Yes || Flixbus || Øl Telecom
|-
| Orange_Murker || Standard || Yes || Yes || Car || ?
|-
| cmpxchg || Standard || Yes || Yes || Car || ?
|-
| Mala || Up-and-coming ticket || Yes || Yes || Train || ?
|-
| Mystery || Standard || Yes || Yes || Auto || ?
|-
| brainsmoke || Standard || Yes || Yes || Train || ?
|-
| Shiz || Standard || Yes || Yes || Auto || fail0verflow
|-
| Piiindakaas || Supporter220 || Yes || Yes || Auto || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| zawadi || Business Ticket || Yes || Yes || Car || HSNL
|-
| qguv || Standard || Yes || Yes || Carpool to Hamburg, carpool or train back || Chaosfurs
|-
| noopwafel || Standard || Yes || Yes || Train || ?
|-
| fk || Standard || Yes || Yes || Car || ?
|-
| Eloy || Standard || Yes || Yes || Train || Øl Telecom
|-
| Boots || Standard || Yes || Yes || Carpool || HSNL
|-
| fluix || Standard || Yes || Yes || ? || ?
|-
| Lmpsk || Standard || Yes || Yes || Train? || ?
|-
| Wheeze_NL || Not through RevSpace || --- || --- || Car (if it doesn't die on the way) || HSNL
|-
|}



==== Friends ====

Same procedure as for participants, but note: '''we will send your ticket to the RevSpace participant''' so only use this if you trust us (to buy your ticket) and them (to forward your ticket to you).

{|class=wikitable
|-
! Name !! Friend of || Ticket type (Standard, Supporter, CCC member) || Money received || Ticket ordered || Mode de transport || Assembly
|-
| Zoe || Mala || Up-and-coming ticket || Yes || Yes || Train || ?
|-
| Jasmina || Mala || Standard || Yes || Yes || Train || ?
|-
| friend of fluix || fluix || Standard || Yes || Yes || ? || ?
|-
| ed || Shiz || Standard || Yes || Yes || Auto || fail0verflow
|-
| elwin || piiindakaas || Standard || Yes || Yes || ? || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| pietdv|| Juerd || Standard || Yes || Yes || Train || HSNL
|-
| zawadi-1 || zawadi || Standard || Yes || Yes || ? || HSNL
|-
| zawadi-2 || zawadi || Standard || Yes || Yes || ? || HSNL
|-
| divd-friend-Bart || piiindakaas || Standard || Yes || Yes || ? || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| julia || Orange_Murker || Standard || Yes || Yes || ? || ?
|-
| lily || Orange_Murker || Standard || Yes || Yes || ? || ?
|-
| th || brainsmoke || supporter 220 || Yes || Yes || trein || ?
|-
| Flora || qguv || Standard || Yes || Yes || trein (vermoedelijk) || Chaosfurs
|-
| divd-friend-Waldo || piiindakaas || Standard || Yes || Yes || ? || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| Albert || noopwafel || Supporter 300 || Yes || Yes || ? || ?
|-
| canada guy || fk || Standard || Yes || Yes || ? || Friendly Maltese Citizens
|-
| entailment || qguv || Supporter 300 || Yes || Yes || trein (vermoedelijk) || Chaosfurs
|-
| chris || piiindakaas || Supporter 220 || Yes || Yes || ? || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| my-friend-Stan || piiindakaas || Standard || Yes || Yes || ? || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| Axel || piiindakaas || Standard || Yes || Yes || ? || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| f.f || Bas || Standard || Yes || Yes || ? || ?
|-
| Huub || Bas || Standard || Yes || Yes || ? || ?
|-
| Rens || Eloy || Supporter 220 || Yes || Yes || ? || ?
|-
| Duncan-1 || Eloy || Standard || Yes || Yes || ? || ?
|-
| Duncan-2 || Eloy || Standard || Yes || Yes || ? || ?
|-
| Welling-pa || Wheeze_NL || Standard || Yes || Yes || ? || ?
|-
| Welling-zoon || Wheeze_NL || Standard || Yes || Yes || ? || ?
|-
| Kevin || Eloy || Supporter 255 || Yes || Yes || ? || ?
|-
| Tim || Eloy || Supporter 220 || Yes || Yes || Car || ?
|-
| zawadi-3 || Zawadi || Standard || Yes || Yes || ? || HSNL
|-
| Zr40 || bwb || Standard || Yes || Yes || ? || HSNL (hackerspaces NL
|-
| Auke || Eloy || Standard || Yes || Yes || ? || ?
|-
| divd-casper || piiindakaas || Standard || Yes || Yes || car || Definitely Into Vulnerability Disclosure (DIVD) / HSNL
|-
| shevek || chris_ty || Standard || Yes || Yes || ? || ?
|-
| Victor || Wheeze_NL || Standard || Yes || Yes || ? || ?
|-
| bwb-2 || bwb || Standard || Yes || Yes || ? || HSNL (hackerspaces NL
|-
| hh || brainsmoke || Standard || Yes || Yes || ? || ?
|-
| beau || chris_ty || Standard || Yes || Yes || ? || ?
|}



=== Tickets for sale ===

== Carpool ==
=== Seats available ===
{|class=wikitable
|-
! Name !! Capacity (seats) || Capacity (luggage) || Fuel type || Fuel economy || Costs || Destination || Parking || Arrival || Leave || Other
|-
| piiindakaas || 2 || lots || electric || # || # || CCC || Somewhere in Hamburg.. || 27th Dec - 12:00 ish || 30th Dec after dinner|| there will be carpool karaoke
|-
| fk || 2 || yes || electric? || # || moneyzz || CCC || Across from CCC || 26th dec - somewhere early noon || 31th Dec - morning/afternoon || Departing from Leusden/Revspace
|-
| You? || # || # || # || # || # || # || Somewhere in Hamburg.. || ? dec || ? dec/jan || #
|-

|}

=== Seats needed ===
{|class=wikitable
|-
! Name !! Luggage requirements || Driving license || Desired arrival || Desired leave
|-
| qguv || a suitcase and a squishable bag || Yes || (already arranged) || 30 dec
|-
|}

=== Seats taken ===
{|class=wikitable
|-
! Driver !! Passengers
|-
| polyfloyd || (Amersfoort -> Hamburg) qguv
|-
|}

== Procedure ==

For board members, but public because there's no reason to keep it secret and it's useful to have everything in one place.



# Wiki-wijzigingen van de afgelopen dag bekijken en fouten verbeteren. Dingen om op te letten: nieuwe inschrijvingen alleen ''onderaan'' de tabel, deelnemers moeten de boolean kolommen niet wijzigen, extra instructies zoals "+1" etc verwijderen.
# Betalingen van de afgelopen dag bekijken, en op de wiki de bijbehorende "Money received" op "Yes" zetten '''als het bedrag klopt'''.
# Per voucher 1 ticket bestellen: eerst deelnemers, dan vrienden. Let op het soort ticket.
#* Je kunt meerdere vouchers in 1 bestelling gebruiken, maar je moet steeds eerst een vouchercode opgeven, en dan kun je 1 ticket kiezen, daarna de volgende vouchercode, en weer 1 ticket, etc.
#* Per bestelling per ticketsoort kun je er maar 5 bestellen. De rest kun je in een 2e bestelling er meteen achteraan doen, maar let op welke vouchers je daarvoor moet gebruiken.
# Per bestelde ticket de bijbehorende kolom op "Yes" zetten en het totaal aantal tickets onder "Status" updaten.
# Bij het bestellen, board@revspace.nl opgeven als adres, ook als adres waar de volgende voucher naartoe moet. '''Spelling controleren, bij fout mailadres raakt de voucher kwijt!'''

OpenEPaperLink

2025-11-30T00:32:00Z

Wheeze NL: /* Links */

{{Project
|Name=OpenEPaperLink
|Picture=EpaperGroupbuy.JPG
|Omschrijving=Gathering info to make getting started with OpenEPaperLink easier.
|Status=Completed
|Contact=Wheeze_NL
}}

Info for tags and AP sold in https://revspace.nl/Epaperinkoop

== This is just a Wheeze_NL braindump for now, it might help you get started ==
There is a very nice project, reusing epaper pricetags from grocery-shops etc. 
The project is called OpenEPaperLink and was kickstarted by dmitri.gr who reversed engineered the firmware and created a new open-source firmware for Solum pricetags. 
A lot of work was also done by Atc1441 (I need to check if I remembered this correctly, and who else has added a lot to the project)

All the information I am trying to make easier to grasp here for beginners, is based on this project, not the original firmware or usage.

== The Access Point (AP) ==
=== General info ===
The access point (AP) usually consists of an ESP32-S2 or ESP32-S3 and second unit like the ESP32-C6. 
The first ESP32 connects to the wifi, the second unit "talks" to the displays over the the IEEE 802.15.4 standard on 2.4Ghz (channel can be auto or selected, probably not exactly the wifi-channels, tbd.) 
The ESP32-S2 can handle about 30 tags, the ESP32-S3 can handle a few hundred. If you have many tags, disable preview in the web interface to save data. 
The simplest AP is a ESP32 with a display as an AP, this has limited coverage due to shitty internal antennas in the tags. 
Many AP's have a tag or another little display for showing the status of the AP such as IP address and connected tags. 
Some AP's have an interface to connect a Flashing-jig, for flashing the tags. 
There are also bluetooth tags and sub-ghz, some of the AP's can handle these as well. I have not played with these, or done any investigation.

=== Out of the box ===
Hook up the USB-cable to your PC. As usual with ESP32 devices, a serial port should appear (insert Pokemon reference, the port might no be wild though) 
Your AP device is probably already flashed, but I found that openepaperlink.de not only handles the flashing, but also setting the wifi-credentials in a nice web-ui (web-serial) 
When you have set your wifi, you can connect to the IP of the AP with your webbrowser of choice and start configuring!
The first tag you'll see, is usually the display/tag of the AP itself.

== Displays (Tags) ==
=== General ===
Random info
* The smaller displays could last a decade when updated twice per day in good RF (radio) conditions.

=== How to start ===
On receiving ready-flashed displays, they will be in deep sleep. 
To start the display, short the terminals by turning the batteries over. If you just pull the batteries out, the internal processor will probably keep running on the energy in the capacitor alone, as it barely uses energy in deep sleep. 
When putting in the batteries, it is recommended to put them on the lid, and push them in together with the lid. If you put them in one by one, there is a big chance of bouncing which results in improper startup of the processor.

=== Now the display starts to work ===
(Details on exact inner workings are on the github page of the project!) https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/RF-protocol 
After turning the displays on, basically the next events happen:
* The tag looks for an AP, and registers it's availability.
* The AP tells the display when to check in.

After you have set an image (or something that generates an image through the web-ui of the AP) the following events take place.
* When the tag checks in with the AP, to see if there is new content available.
* The AP responds that there is a new image.
* The tag requests the blocks of information.
* The AP transmits those
* If the tag doesn't fully receive some, it wil re-request those blocks.
* After fully receiving all the information, the tag confirms reception to the AP
* The AP tells the tag when to check in again, based on the settings in the AP. This can be in 40 seconds, 1 hour, or a few options in between. (I will add the specific options later) 
* The AP updates the preview in the web UI

If there is no new content:
* The AP just tells the tag when to check in again, based on the settings in the AP.

== On the topic of the RF-interface ==
As written before, the protocol written for these tags are using the IEEE 802.15.4 spec.
The image shows the overlap with the 802.11bgn wifi channels, choose wisely (and please add other tech running on these frequencies)

Suggestion; use 26. While 25 is also "outside" of the Wi-Fi channels, it is still caught in the sidelobe of channel 11 (of Wi-Fi). In case you're running Zigbee, 25 is recommended for that, as 26 is not universally supported.
[[File:Overlapping-IEEE-802154-and-IEEE-80211-channels.png|thumb|image from researchgate.net]]

== How to show stuff?!?! ==
=== The easy start ===
Go to the AP web ui, left-click the tag you want to change, and check the options that exist in the default firmware such as weather and date/time. 
There is an advanced section at the bottom to do things like putting the tag to "permanent" deep sleep (until you reset it) or clear a waiting image for a tag.

=== What works for me so far ===
What I have found to work (through the wiki) is POST-ing an image of the correct size through HTTP. Info on https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Image-upload
The size of the display and the mac-address can be found in the web-ui.

=== A web-socket ===
I am trying to figure out how to get the information from the AP. It should be available, as it is seen in the Home Assistant plugin... 
Info seems to be available via a websocket on '''ws://{host}/ws'''
Info about the tags shows up here when the tag checks in.

=== Home Assistant ===
There is a HACS plugin for Home Assistant, which makes it possible to control the AP and tags through HA automation and such.

== "DIY AP" ==
Some of us got DIY AP, I have not tried them yet, but I got the following instruction for getting them to work:

The DIY Set is currently not added to install.openepaperlink.de so it needs to be manual compiled from the source.
Thats not a problem and also not very complicated
It is this config that needs to be selected: 
https://github.com/OpenEPaperLink/OpenEPaperLink/blob/master/ESP32_AP-Flasher/platformio.ini#L441

And after flashing that the file system itself needs to be flashed as well via the PlatformIO "Upload Filesystem Image" button then it is the same state as if flashed via the WebFlasher

=== Case ===
==== Nemo's version:====
[[File:Testen en printen.png|400px]] 
https://www.printables.com/model/1133397-nemo-de-beun-epaper-access-point-case 

==== Bas' version ====
[[File:basopenepaperdiyapdoosje.jpeg|400px]]

https://github.com/sebastius/openepaper_diy_ap_doosje

https://makerworld.com/en/models/956364

== Tips & Tricks ==
Om het plaatje goed op het wifi epaper display te zetten 
convert wifi3.png -quality 100 -sampling-factor 4:4:4 wifi3.jpg

== Links ==
Main wiki:
https://github.com/OpenEPaperLink/OpenEPaperLink 
List of most AP's
https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Building-an-Access-Point

Meshcore

2025-11-28T13:47:10Z

Wheeze NL: /* Aanmelden */

{{Project
|Name=MeshCore
|Status=Initializing
|Contact=Bas, Anne Jan, Paul
}}

{{Event
|Name=Workshop/Lecture MeshCore
|DateStart=29 November 2025 15:00
|DateEnd=29 November 2025 18:00
|Info=Lecture/Workshop about MeshCore
|InfoLocation=RevSpace
|InfoOpen=12:30
}}

=Workshop=
Een introductie in MeshCore en als je een compatible apparaatje meeneemt (wij hebben ook een aantal mee, dus geen aankoopplicht ;) ): tevens een workshop om er mee te beginnen!

Heb je eerder dit jaar tijdens het Hackerhotel een Meshtastic kitje aangeschaft, maar niets meer met je Meshtastic gedaan? Dan is dat kitje met Heltec V3 een prima starter bij deze MeshCore workshop.

Je kunt eventueel een Heltec V3 meebestellen voor 25 euro incl btw. Zet dat dan even in de tabel hieronder erbij. Maar je mag natuurlijk ook je eigen spul meenemen.

==Inhoud==
* Wat is MeshCore
* Waarom is het leuk
* Verschillende rollen
* Hardware (en hoe het uit de hand loopt)
* Configuratie
* Demo
* Speeltijd en hulp met het werkend krijgen.
==Aanmelden==
Let op: we kunnen maximaal 20 deelnemers huisvesten en begeleiden.

Je kunt geen Heltec v3 meer meebestellen. Hij is zonder case nog wel leverbaar via TinyTronics: https://www.tinytronics.nl/nl/development-boards/microcontroller-boards/met-lora/heltec-wi-fi-lora-32-esp32-s3-sx1262-met-0.96-inch-oled-display

{| class="wikitable"
|+ Bijschrift
|-
! Naam !! Meebestellen Heltec V3 !! Betaald?
|-
| Wheeze_NL || Nee || .
|-
| Crashjuh || Nee || .
|-
| polyfloyd || Nee || .
|-
| sting || Nee || .
|-
| Colomax || 2x || ja
|-
| Atoomnet || Nee || .
|-
| blaat || 1x || ja
|-
| Lukkie || 1x || ja
|-
| Wilbert || nee || .
|-
| CH23 || nee || .
|-
| TeQ || nee || .
|-
| Kartoffel || nee
|-
| Richard || ja || .
|-
| Gori || nee || .
|-
| Dimi || nee || .
|-
| Muad-Dib || nee || .
|-
| florian || nee || .
|-
| Colomax + 1 || nee || .
|-
| [[supakeen]] || nee || .
|-
| Jij? Dit plekje is beschikbaar! || nee || .

|}

=Inkoopactie voor een Meshcore Router op de space=

We willen de https://heltec.org/project/meshtower/ MeshTower van Heltec. Er is al MeshCore firmware voor.

{| class="wikitable"
|+ Bijschrift
|-
! Wie !! Hoeveel tientjes !! Betaald?
|-
| Bas || 2 || ja
|-
| CH23 || 2 || ja
|-
| Wilbert || 2 || ja
|-
| Crashjuh || 3 || ja
|-
| Elborro || 2 || ja
|-
| sting || 1 || ja
|-
| Colomax || 1 || ja
|-
| Wheeze_NL || 1 || ja
|-
| Boekenwuurm || 1 || nee
|-
| thomas || 1 || ja
|-
| jelle || 2 || ja
|-
| Lukkie || 2 || ja
|-
| cmpxchg || 1 || nee
|-

| Voorbeeld || Voorbeeld || Voorbeeld
|}

Totaal: 200 euro van de 200 euro

Wil je ook een MeshTower meebestellen of iets anders van HelTec? Dat kan, zet het hieronder jouw bestelling. Met meerdere MeshTowers zakt de prijs van 230 euro per stuk naar ongeveer 200!

{| class="wikitable"
|+ Bijschrift
|-
! Wie !! Wat !! Totaal ex verzenden in $ !! Totaal berekend door Bas incl verzenden !! Betaald?
|-
| RandomData (via Bas)|| 1x MeshTower|| .|| 200|| Ja
|-
| Bas || 1x Heltec V4 || .|| x || Ja
|-
| Bart Jan (RandomData) || 1x MeshTower ||.||200||Ja
|-
| Lukkie || 1x MeshTower || .||200||Ja
|-
| BlackDragon || 1x Heltec V4 || 20 || 25 || ja
|-
| Wheeze_NL || 1x Heltec V4 || 20 || ?? || ja
|-
| HS Nijmegen via Bas || 1x MeshTower ||.||200||Ja
|-
| cmpxchg || 1x MeshTower ||.||200|| ja
|-
| Synq || 1x MeshTower, 1x V3||.||225||Ja
|-
| Elborro || 1x MeshTower ||.||200||Ja
|-
| Dimi || 1x MeshTower ||.||200||Ja
|-
|}

De inkoopactie is gesloten. Alle hardware is besteld (9x MeshTower, 6x V3 en 3x V4).

Meshcore

2025-11-08T22:18:45Z

Wheeze NL: /* Inkoopactie voor een Meshcore Router op de space */

{{Project
|Name=MeshCore
|Status=Initializing
|Contact=Bas, Anne Jan, Paul
}}

{{Event
|Name=Workshop/Lecture MeshCore
|DateStart=29 November 2025 15:00
|DateEnd=29 November 2025 18:00
|Info=Lecture/Workshop about MeshCore
|InfoLocation=RevSpace
|InfoOpen=12:30
}}

=Workshop=
Een introductie in MeshCore en als je een compatible apparaatje meeneemt (wij hebben ook een aantal mee, dus geen aankoopplicht ;) ): tevens een workshop om er mee te beginnen!

Heb je eerder dit jaar tijdens het Hackerhotel een Meshtastic kitje aangeschaft, maar niets meer met je Meshtastic gedaan? Dan is dat kitje met Heltec V3 een prima starter bij deze MeshCore workshop.

Je kunt eventueel een Heltec V3 meebestellen voor 25 euro incl btw. Zet dat dan even in de tabel hieronder erbij. Maar je mag natuurlijk ook je eigen spul meenemen.

==Inhoud==
* Wat is MeshCore
* Waarom is het leuk
* Verschillende rollen
* Hardware (en hoe het uit de hand loopt)
* Configuratie
* Demo
* Speeltijd en hulp met het werkend krijgen.
==Aanmelden==
Let op: we kunnen maximaal 20 deelnemers huisvesten en begeleiden.
{| class="wikitable"
|+ Bijschrift
|-
! Naam !! Meebestellen Heltec V3 !! Betaald?
|-
| Wheeze_NL || Nee || .
|-
| Elborro || Nee || .
|-
| Crashjuh || Nee || .
|-
| polyfloyd || Nee || .
|-
| sting || Nee || .
|-
| Colomax || 2x || ja
|-
| Atoomnet || Nee || .
|-
| blaat || 1x || ja
|-
| Lukkie || 1x || ja
|-
| Wilbert || nee || .
|-
| CH23 || nee || .
|-
| TeQ || nee || .
|-
| Kartoffel || nee
|-
| Richard || ja || .
|-
| Jij? || 2x || Nee
|}

=Inkoopactie voor een Meshcore Router op de space=

We willen de https://heltec.org/project/meshtower/ MeshTower van Heltec. Er is al MeshCore firmware voor.

{| class="wikitable"
|+ Bijschrift
|-
! Wie !! Hoeveel tientjes !! Betaald?
|-
| Bas || 2 || ja
|-
| CH23 || 2 || ja
|-
| Wilbert || 2 || ja
|-
| Crashjuh || 3 || ja
|-
| Elborro || 2 || ja
|-
| sting || 1 || ja
|-
| Colomax || 1 || ja
|-
| Wheeze_NL || 1 || ja
|-
| Boekenwuurm || 1 || nee
|-
| thomas || 1 || ja
|-
| jelle || 2 || ja
|-
| Lukkie || 2 || ja
|-

| Voorbeeld || Voorbeeld || Voorbeeld
|}

Totaal: 200 euro van de 200 euro

Wil je ook een MeshTower meebestellen of iets anders van HelTec? Dat kan, zet het hieronder jouw bestelling. Met meerdere MeshTowers zakt de prijs van 230 euro per stuk naar ongeveer 200!

{| class="wikitable"
|+ Bijschrift
|-
! Wie !! Wat !! Totaal ex verzenden in $ !! Totaal berekend door Bas incl verzenden !! Betaald?
|-
| RandomData (via Bas)|| 1x MeshTower|| .|| 200|| Ja
|-
| Bas || 1x Heltec V4 || .|| x || Ja
|-
| Bart Jan (RandomData) || 1x MeshTower ||.||200||Ja
|-
| Lukkie || 1x MeshTower || .||200||Ja
|-
| BlackDragon || 1x Heltec V4 || 20 || 25 || ja
|-
| Wheeze_NL || 1x Heltec V4 || 20 || ?? || nee
|-

|}

Meshcore

2025-11-02T22:18:04Z

Wheeze NL: /* Workshop */

{{Project
|Name=MeshCore
|Status=Initializing
|Contact=Bas
}}

{{Event
|Name=Workshop/Lecture MeshCore
|DateStart=29 November 2025 15:00
|DateEnd=29 November 2025 18:00
|Info=Lecture/Workshop about MeshCore
|InfoLocation=RevSpace
|InfoOpen=12:30
}}

=Workshop=
Een introductie in MeshCore en als je een compatible apparaatje meeneemt: tevens een workshop om te beginnen er mee!

Je kunt eventueel een Heltec V3 meebestellen voor 22 euro incl btw. Zet dat even in de tabel hieronder erbij. Maar je mag ook zelf spul meenemen.

{| class="wikitable"
|+ Bijschrift
|-
! Naam !! Meebestellen Heltec V3 !! Betaald?
|-
| Ranzbak || Nee || .
|-
| Anne Jan || Nee || .
|-
| Bas || Nee || .
|-
| Wheeze_NL || Nee || .
|-
| Jij? || 2x || Nee
|}

=Inkoopactie voor een Meshcore Router op de space=

We willen de https://heltec.org/project/meshtower/ MeshTower van Heltec. Er is al MeshCore firmware voor.

{| class="wikitable"
|+ Bijschrift
|-
! Wie !! Hoeveel tientjes !! Betaald?
|-
| Bas || 2 || nee
|-
| CH23 || 2 || nee
|-
| Wilbert || 2 || nee
|-
| Crashjuh || 2 || nee
|-
| Voorbeeld || Voorbeeld || Voorbeeld
|}

Totaal: 80 euro van de 230 euro

Wil je ook een MeshTower meebestellen of iets anders van HelTec? Dat kan, zet het hieronder jouw bestelling. Met meerdere MeshTowers zakt de prijs van 230 euro per stuk naar ongeveer 200!

{| class="wikitable"
|+ Bijschrift
|-
! Wie !! Wat !! Totaal ex verzenden in $ !! Totaal berekend door Bas incl verzenden !! Betaald?
|-
| jij || dingen || 100 || 150 || Nee
|}

39C3 Tickets

2025-10-31T21:42:23Z

Wheeze NL: /* Friends */

{{Project
|Name=39C3 Tickets
|Status=Initializing
|Contact=Board
}}

* https://events.ccc.de/en/2025/10/16/39c3-presale-modus-operandi/
* https://events.ccc.de/congress/2025/infos/startpage.html
* https://tickets.events.ccc.de/39c3/

Open sale after voucher phase:
* 2025-11-08, Saturday, 11:00 Uhr (CET)
* 2025-11-17, Monday, 20:00 Uhr (CET)

== Status ==

* We have received 7+1+2+2 replicating vouchers, and 1 non-replicating voucher, and have used those to order '''51''' tickets thus far.
* We've reached the end of the list 🎉. You can still sign up, but send en email to board@revspace.nl to notify us because we won't be watching this page very closely anymore.
* We currently have '''3''' unused voucher(s) available.
* The ticket PDFs have not yet been received from the CCC.
* The ticket PDFs have not yet been emailed to RevSpace participants.

A log of datetimes, because everyone's asking when things will happen. We don't know, we haven't figured out the logic yet.

(Times intentionally obfuscated.)

* 2025-10-17 4:xx - confirmed group info for 39c3 presale
* 2025-10-21 0:xx - received initial vouchers
* 2025-10-21 0:xx - orders placed
* 2025-10-21 2:xx - payments confirmed by CCC
* 2025-10-22 23:xx - received replicated vouchers
* 2025-10-22 23:xx - orders placed
* 2025-10-23 2:xx - payment confirmed by CCC
* 2025-10-24 22:xx - received replicated vouchers
* 2025-10-24 23:xx - orders placed
* 2025-10-25 nothing (Saturday)
* 2025-10-26 nothing (Sunday)
* 2025-10-27 1:xx - payment confirmed by CCC
* 2025-10-27 7:xx - payment confirmed by CCC
* 2025-10-27 22:xx - received replicated vouchers
* 2025-10-27 22:xx - orders placed
* 2025-10-28 1:xx - payments confirmed by CCC
* 2025-10-28 14:xx - got an additional voucher from a friendly hackerspace and ordered one more ticket
* 2025-10-28 14:xx - payment confirmed by CCC
* 2025-10-29 22:xx - received replicated vouchers
* 2025-10-29 22:xx - orders placed
* 2025-10-29 23:xx - got 2 additional vouchers from a friendly hackerspace and ordered two more tickets
* 2025-10-29 1:xx - payments confirmed by CCC
* 2025-10-30 11:xx - got 2 additional vouchers from a friendly hackerspace and ordered two more tickets
* 2025-10-30 11:xx - payment confirmed by CCC
* 2025-10-30 22:xx - got an additional voucher from a friendly individual and ordered one more ticket
* 2025-10-31 1:xx - payment confirmed by CCC
* 2025-10-31 21:xx - received replicated vouchers
* 2025-10-31 22:xx - orders placed

== Tickets ==

To buy a ticket through RevSpace,

# Append your entry to the appropriate table below. One row per ticket. "+1" etc. will be removed, because the voucher workflow can't accommodate that. Add your +1 to the "Friends" table instead; again, one row per ticket.
#* Keep the "Money received" and "Ticket ordered" columns to "No". A RevSpace board member will update these.
# Pay the '''exact and [https://tickets.events.ccc.de/39c3/ correct] amount''' to NL18ABNA0887700780 of <tt>Revelation Space</tt>, with your nickname and the text "39c3 ticket" in the description field.
#* If the amount is not enough, we will not order your ticket. If it is too much, we will keep the rest as a donation.
#* Note: this is a different account than for your monthly contribution, and it is also completely unrelated to RevBank.
#* If you find out that you made a mistake, like if you forgot your name in the description, please contact board@revspace.nl
# We will '''try''' to buy a ticket on your behalf on the 39C3 ticket site, pay the money to the CCC IBAN, and wait for the next round of vouchers.
# First come, first served, but only if you have added your entry to the table AND paid the exact and correct amount.
# RevSpace participants get precedence over friends, one ticket per participant.
# If a participants has many friends who want tickets, we will arbitrarily give priority to other friends of other participants to keep things somewhat fair :)
# After the tickets are distributed by the CCC (shortly before the event), we will send it to your email address known to us.
# If we couldn't buy your ticket during the voucher phase, we will return the money to the same IBAN it came from. Don't cancel your bank account during these weeks :)

==== Revspace Participants ====
{|class=wikitable
|-
! Name !! Ticket type (Standard, Supporter, CCC member) || Money received || Ticket ordered || Mode de transport
|-
| Chris_ty || Standard || Yes || Yes || Train
|-
| Peetz0r || Standard || Yes || Yes || Flixbus, probably
|-
| Orange_Murker || Standard || Yes || Yes || Car
|-
| cmpxchg || Standard || Yes || Yes || Car
|-
| Mala || Up-and-coming ticket || Yes || Yes || Train
|-
| Mystery || Standard || Yes || Yes || Auto
|-
| brainsmoke || Standard || Yes || Yes || Train
|-
| Shiz || Standard || Yes || Yes || Auto
|-
| Piiindakaas || Supporter220 || Yes || Yes || Auto
|-
| zawadi || Business Ticket || Yes || Yes || Car
|-
| qguv || Standard || Yes || Yes || Train
|-
| noopwafel || Standard || Yes || Yes || Train
|-
| fk || Standard || Yes || Yes || Car
|-
| Eloy || Standard || Yes || Yes || Train
|-
| Boots || Standard || Yes || Yes || Carpool
|-
| fluix || Standard || Yes || Yes || ?
|-
| Lmpsk || Standard || Yes || Yes || Train?
|-
|}


==== Friends ====

Same procedure as for participants, but note: '''we will send your ticket to the RevSpace participant''' so only use this if you trust us (to buy your ticket) and them (to forward your ticket to you).

{|class=wikitable
|-
! Name !! Friend of || Ticket type (Standard, Supporter, CCC member) || Money received || Ticket ordered || Mode de transport
|-
| Zoe || Mala || Up-and-coming ticket || Yes || Yes || Train
|-
| Jasmina || Mala || Standard || Yes || Yes || Train
|-
| friend of fluix || fluix || Standard || Yes || Yes || ?
|-
| ed || Shiz || Standard || Yes || Yes || Auto
|-
| elwin || piiindakaas || Standard || Yes || Yes || ?
|-
| pietdv|| Juerd || Standard || Yes || Yes || ?
|-
| zawadi-1 || zawadi || Standard || Yes || Yes || ?
|-
| zawadi-2 || zawadi || Standard || Yes || Yes || ?
|-
| divd-friend-Bart || piiindakaas || Standard || Yes || Yes || ?
|-
| julia || Orange_Murker || Standard || Yes || Yes || ?
|-
| lily || Orange_Murker || Standard || Yes || Yes || ?
|-
| th || brainsmoke || supporter 220 || Yes || Yes || trein
|-
| Flora || qguv || Standard || Yes || Yes || trein (vermoedelijk)
|-
| divd-friend-Waldo || piiindakaas || Standard || Yes || Yes || ?
|-
| Albert || noopwafel || Supporter 300 || Yes || Yes || ?
|-
| canada guy || fk || Standard || Yes || Yes || Car
|-
| entailment || qguv || Supporter 300 || Yes || Yes || trein (vermoedelijk)
|-
| chris || piiindakaas || Supporter 220 || Yes || Yes || ?
|-
| my-friend-Stan || piiindakaas || Standard || Yes || Yes || ?
|-
| Axel || piiindakaas || Standard || Yes || Yes || ?
|-
| f.f || Bas || Standard || Yes || Yes || ?
|-
| Huub || Bas || Standard || Yes || Yes || ?
|-
| Rens || Eloy || Supporter 220 || Yes || Yes || ?
|-
| Duncan-1 || Eloy || Standard || Yes || Yes || ?
|-
| Duncan-2 || Eloy || Standard || Yes || Yes || ?
|-
| Welling-pa || Wheeze_NL || Standard || Yes || Yes || ?
|-
| Welling-zoon || Wheeze_NL || Standard || Yes || Yes || ?
|-
| Kevin || Eloy || Supporter 255 || Yes || Yes || ?
|-
| Tim || Eloy || Supporter 220 || Yes || Yes || Car
|-
| zawadi-3 || Zawadi || Standard || Yes || Yes || ?
|-
| Zr40 || bwb || Standard || Yes || Yes || ?
|-
| Auke || Eloy || Standard || Yes || Yes || ?
|-
| <s>fluix-2</s> || <s>Fluix</s> || <s>Standard</s> Please do not purchase || Yes || No || ?
|-
| divd-casper || piiindakaas || Standard || Yes || Yes || car
|-
| shevek || chris_ty || Standard || Yes || Yes || ?
|-
| Victor || Wheeze_NL || Standard || No || No || ?
|}



=== Tickets for sale ===

== Carpool ==
=== Seats available ===
{|class=wikitable
|-
! Name !! Capacity (seats) || Capacity (luggage) || Fuel type || Fuel economy || Costs || Destination || Parking || Arrival || Leave || Other
|-
| piiindakaas || 2 || lots || electric || # || # || CCC || Somewhere in Hamburg.. || 27th Dec - 12:00 ish || 30th Dec after dinner|| there will be carpool karaoke
|-
| polyfloyd || 2 || yes || E10 dinosaur juice || 6.8L/100KM || $fuel/$passengers || CCC || P+R Tiergarten Hagebeck || 26th Dec - 11:00 ish || 30th Dec ~16:00 || Departing from Amersfoort
|-
| fk || 2 || yes || electric? || # || moneyzz || CCC || Across from CCC || 26th dec - somewhere early noon || 31th Dec - morning/afternoon || Departing from Leusden/Revspace
|-
| You? || # || # || # || # || # || # || Somewhere in Hamburg.. || ? dec || ? dec/jan || #
|-

|}

=== Seats needed ===
{|class=wikitable
|-
! Name !! Luggage requirements || Driving license || Desired arrival || Desired leave
|-
| You || 20 heavy crates || Recently revoked || 27 dec or earlier || 30 dec or later
|-
|}

=== Seats taken ===
{|class=wikitable
|-
! Name !! Seats
|-
|}

== Procedure ==

For board members, but public because there's no reason to keep it secret and it's useful to have everything in one place.



# Wiki-wijzigingen van de afgelopen dag bekijken en fouten verbeteren. Dingen om op te letten: nieuwe inschrijvingen alleen ''onderaan'' de tabel, deelnemers moeten de boolean kolommen niet wijzigen, extra instructies zoals "+1" etc verwijderen.
# Betalingen van de afgelopen dag bekijken, en op de wiki de bijbehorende "Money received" op "Yes" zetten '''als het bedrag klopt'''.
# Per voucher 1 ticket bestellen: eerst deelnemers, dan vrienden. Let op het soort ticket.
#* Je kunt meerdere vouchers in 1 bestelling gebruiken, maar je moet steeds eerst een vouchercode opgeven, en dan kun je 1 ticket kiezen, daarna de volgende vouchercode, en weer 1 ticket, etc.
#* Per bestelling per ticketsoort kun je er maar 5 bestellen. De rest kun je in een 2e bestelling er meteen achteraan doen, maar let op welke vouchers je daarvoor moet gebruiken.
# Per bestelde ticket de bijbehorende kolom op "Yes" zetten en het totaal aantal tickets onder "Status" updaten.
# Bij het bestellen, board@revspace.nl opgeven als adres, ook als adres waar de volgende voucher naartoe moet. '''Spelling controleren, bij fout mailadres raakt de voucher kwijt!'''

39C3 Tickets

2025-10-24T18:10:13Z

Wheeze NL: /* Friends */

39C3 Tickets

2025-10-23T18:49:57Z

Wheeze NL: Ik ga wel, maar heb met een andere voucher een ticket aangeschaft.

39C3 Tickets

2025-10-17T19:26:50Z

Wheeze NL: /* Revspace Participants */

Grote HSNL kaart

2025-09-12T13:59:59Z

Wheeze NL:

{{Project
|Name=Grotere HSNL kaart
|Picture=2020-01-31_220746_-_DSC08729 8690 8691.png
|Omschrijving=Grotere HSNL kaart
|Status=Initializing
|Contact=Bas
}}

Ik wil graag een grotere versie van de '[[Decennium]]' maken. Absurd groot eigenlijk. 40x50 centimeter ongeveer. Met PCB, 1.6mm dik.

Na tips van Juerd toch besloten voor andere LEDs te gaan (adresseerbare). Verder is de printplaat dus groter, EN actueler. Alle 15 spaces van Hackerspaces.nl staan er op.

Reken op ongeveer 75-80 euro voor een PCB met ledjes, esp32, weerstandjes etc. Misschien ga ik wel helemaal los en komt er een USB C connectortje op voor de voeding. Dit is op basis van 10 stuks. Bij 20 stuks wordt het fors goedkoper, dus bestel snel!

Inschrijven is committeren. Dus niet een week later jezelf weer weghalen :)

Ik ga intussen rustig aan alles tekenen in Kicad, zodra we genoeg meedoeners hebben ga ik bestellen en krijg je een tikkie-equivalent.

{| class="wikitable"
|+ Ik wil meedoen!
|-
! Naam !! Aantal !! Bereikbaar via hackerspace
|-
| Bas || 1 || Revspace
|-
| Elborro || 1 || Revspace
|-
| Anus || 1 || Revspace
|-
| Harmen || 1 || DeWar
|-
| Pieter || 1 || AwesomeSpace
|-
| Mack en vrienden || 1 || Hack42
|-
| Wheeze_NL (als we de DEC voor die tijd er op krijgen) || 2 || RevSpace
|-
| PA1L (als we de DEC voor die tijd er op krijgen) || 1 || PI4DEC
|-
| PA1ER (als we de DEC voor die tijd er op krijgen) || 1 || PI4DEC
|-
| PD0PEY (als we de DEC voor die tijd er op krijgen) || 1 || PI4DEC
|-
| Jij? || X || ?
|}

Grote HSNL kaart

2025-09-11T13:47:46Z

Wheeze NL:

HotplateSMDSolderingWorkshop

2025-08-30T23:37:24Z

Wheeze NL: /* (prospective) participant list */

Using a stencil, solder paste and a hot-plate to reflow-solder SMD components

== About this workshop ==

=== Intro ===

Surface Mounted Devices (SMDs) are small compared to Through Hole (TH) electronic components, and some electronics hobbyists find them difficult to work with: difficult to see and handle, when you sneeze, you loose them and you can not easily use them on 2.54mm raster prototyping boards.
On the other hand, SMD devices allow much more lightweight and compact projects,are most often much cheaper than TH variants, and sometimes there simply ''are'' no TH variants available of a component, requiring the use of break-out or adapter boards - both kludgy and expensive.
Also, Printed Circuit Board (PCB) prototype manufacturing prices have become much lower, CAD tools to design them have become more accessible to hobbyists, and a proper PCB is much easier, reliable and often faster to assemble than the identical circuit on a 2.54mm raster prototyping boards - especially when you make a (small) series of the same board. So, if your hobby-elecronics work-queue is long enough to wait 2 weeks for PCBs to arrive, NOT using 2.54mm raster prototyping boards and TH components makes sense and may save time and money.
The question then becomes: how can you deal - in a hobby context - with SMD components that are difficult to see handle, and that you loose when you sneeze.

=== Beginners ===

If you are an absolute beginner, you will make a badge during this workshop. The badge will take about one hour (more if a lot of people participate). It can be done much quicker. The record time is 12 minutes.

The badge workshop uses a workflow that alleviates some of the difficulties using tricks, (simple) tools, physics and appropriate materials.

Instead of solder wire, you will use solder paste to solder. You will apply the solder paste to specific areas of the PCB using a stencil. While we are doing this some physical properties of the solder paste, the metal and flux it contains and the properties of the materials in the PCB will be discussed and explained how this helps the soldering process.

Next we will use a mirror and tweezers to place the SMD components on the PCB in their correct position and orientation, with an explanation of tricks, tools, rituals and environmental factors that make this more enjoyable. In addition, while we are doing this, the function of the electronics components will be briefly explained and what to watch out for.

After we have finished placing the SMD components, the assembled PCB will be "baked" on a stove. Again, there are a few do's and dont's, but in general this part is quick, and somewhat "magical" if this is the first time you see reflow soldering in action.

If necessary, small problems will be fixed, a battery holder attached using a normal soldering iron, and the badge will be tested. Success rate is almost 100%

Finally you will return the tools, discard your garbage, clean-up your workspace and wash your hands.

=== Experienced ===

If you have some experience with the workflow and can work independently, you may opt to make a game. This will take about two hours. It can be done much quicker. The record times is 41 minutes.

If you want to make the game, it is assumed that you have worked with solder paste and a stencil before. You may pick up a few tricks, but there is less time for explanation.

After finishing you will return the tools, discard your garbage, clean-up your workspace and wash your hands.

=== Warnings ===

During this workshop you may come into contact with potentially harmful materials and tools like lead, flux and soldering equipment. Please,
* Do NOT eat or drink during the workshop UNLESS you wash your hands with soap first.
* Do NOT pick your nose, ears or rub your eyes during the workshop UNLESS you wash your hands with soap first.
* Do NOT go to the toilet during the workshop UNLESS you wash your hands with soap first.
* DO wash your hands with soap AFTER the workshop
* When using pliers to cut component leads, HOLD the wire-end you are cutting to prevent it from being launched at someone or something
* Be careful with the stove. If you touch the hot stove your hand, it may stick to it. This can be painful and may require an emergency room visit
* In general: treat tools (litteral and figurative) with respect - "accidents" can be painful

== About the Projects ==

During the workshop you will make either a badge or a 'blocktris' game. The badge contains a ''larger variety'' of different components. The game contains a ''larger number'' of components. Neither is very difficult to make, but I consider the badge better for beginners: you learn more, and it costs less.

The workshop can also be fun for more experienced people: how quickly can you make a badge or a game, and how well does it look? (hint: rework must be avoided). The current record times for succesful hotplate reflow soldering are 12 minutes for a badge and 41 minutes for the game. The record time for succesful hand soldering the badge is 21 minutes. So far no one has even attempted to hand-solder the game.

=== The Badge ===
Contains 24 blinking RGB LEDs, various support components, a microcontroller and you can actually write your name on it.

[[File:hackwinkelbadge.jpeg|thumb|alt=Badge image|image of the hackwinkel badge]]

You can see it in action in [[https://hackwinkel.nl/tag.mp4 this video]]

Both [https://github.com/hackwinkel/tag-hardware | hardware] and [https://github.com/hackwinkel/tag-software | software] of the badge are MIT licensed open source.

=== The 'blocktris' game ===

The game contains 200 RGB LEDs in an array of 20 x 10 pixels controlled by an ESP32-C3 microcontroller module, ideal for playing 'blocktris'.

[[File:blocktris.jpeg|thumb|alt=Blocktris game image|Image of the blocktris game]]

You can see it in action in [[https://hackwinkel.nl/blocktris.mp4 this video]]

Both [https://github.com/hackwinkel/10x20_LED_screen | hardware software] of the game are BSD 3-Clause licensed open source.

== Costs of this workshop ==

The Costs depend on what you do:
* Badge: 0 euro + a voluntary donation to the space each
* Game: 8 euro + a voluntary donation to the space each

== Planning / Poll ==

=== general notes ===

First of all we need to select a date, but also get some idea who may come and how much material is necessary.

If you want to join the workshop, please indicate your preferences for dates in the table below, and what you would like to make (badge and/or game). '''Add more lines if necessary. Depending of the number of people, we can do multiple sessions'''

Doors open 11:35, first session start: 12:00, last session start: 16:00

'''Note:''' The "ideal" number of participants per session depends: Beginners/kids (with adult supervision): 5-10, People with some prior experience working with stencils, solder paste and a hot-plate: ~15, Experts: 20 (tools bottleneck). The maximum for a session so far was 42, and that was only possible because there were lots of experts helping others out, but the tooling (stencil and hotplate) bottleneck resulted in an overrun of ~ 2 hours.
'''If this is your first time working with stencils, solder paste and a hot-plate OR if you are younger than 14 OR if you have never done any soldering before, put this in the remark'''s - it is definitely not a problem, but affects how the workshop flows.

=== (prospective) participant list ===
{| class="wikitable"
|+ Date Poll
|-
! # || name/nick !! 2025-10-04 !! 2025-10-18 !! 2025-10-25 !! What || remark
|-
| 0 || The0 || Yes || Yes ||Yes || Both || Organizer
|-
| 1 || Host? || Yes|| Maybe || No || Example || Example
|-
| 2 || Wheeze_NL || Yes || No || No || Badge || After 14:00
|-
| 3 || Example || Example || Example || Example || Example || Example
|-
| 4 || Example || Example || Example || Example || Example || Example
|-
| 5 || Example || Example || Example || Example || Example || Example
|-
| 6 || Example || Example || Example || Example || Example || Example
|-
| 7 || Example || Example || Example || Example || Example || Example
|-
| 8 || Example || Example || Example || Example || Example || Example
|-
| 9 || Example || Example || Example || Example || Example || Example
|-
| 10 || Example || Example || Example || Example || Example || Example
|-
| 11 || Example || Example || Example || Example || Example || Example
|-
| 12 || Example || Example || Example || Example || Example || Example
|-
| 13 || Example || Example || Example || Example || Example || Example
|-
| 14 || Example || Example || Example || Example || Example || Example
|-
| 15 || Example || Example || Example || Example || Example || Example
|-
| 16 || Example || Example || Example || Example || Example || Example
|-
| 17 || Example || Example || Example || Example || Example || Example
|-
| 18 || Example || Example || Example || Example || Example || Example
|-
| 19 || Example || Example || Example || Example || Example || Example
|-
| 20 || Example || Example || Example || Example || Example || Example
|}

== What if... ==

=== You can not add your name to the participant list ===

Please drop a line with your details in the [https://forum.revspace.nl/t/interest-in-a-hotpate-smd-reflow-soldering-workshop/702 | relevant forum topic]

If you can't, please get in touch with the organizer (The0), for instance on IRC (OFTC)

=== You put your name on the list but can't come ===

Shit happens. No problem, do nothing. Maybe see you next time.

=== You only noticed this workshop at a late date ===

Try getting in touch, and we may work out something. If you just show up and it is busy, then you may not be able to join. If there are places available: FCFS

=== Your badge or game doesn't work ===

You will be the first. We may try to fix it, but no refunds

OpenEPaperLink

2025-08-19T19:49:18Z

Wheeze NL:

{{Project
|Name=OpenEPaperLink
|Picture=EpaperGroupbuy.JPG
|Omschrijving=Gathering info to make getting started with OpenEPaperLink easier.
|Status=Completed
|Contact=Wheeze_NL
}}

Info for tags and AP sold in https://revspace.nl/Epaperinkoop

== This is just a Wheeze_NL braindump for now, it might help you get started ==
There is a very nice project, reusing epaper pricetags from grocery-shops etc. 
The project is called OpenEPaperLink and was kickstarted by dmitri.gr who reversed engineered the firmware and created a new open-source firmware for Solum pricetags. 
A lot of work was also done by Atc1441 (I need to check if I remembered this correctly, and who else has added a lot to the project)

All the information I am trying to make easier to grasp here for beginners, is based on this project, not the original firmware or usage.

== The Access Point (AP) ==
=== General info ===
The access point (AP) usually consists of an ESP32-S2 or ESP32-S3 and second unit like the ESP32-C6. 
The first ESP32 connects to the wifi, the second unit "talks" to the displays over the the IEEE 802.15.4 standard on 2.4Ghz (channel can be auto or selected, probably not exactly the wifi-channels, tbd.) 
The ESP32-S2 can handle about 30 tags, the ESP32-S3 can handle a few hundred. If you have many tags, disable preview in the web interface to save data. 
The simplest AP is a ESP32 with a display as an AP, this has limited coverage due to shitty internal antennas in the tags. 
Many AP's have a tag or another little display for showing the status of the AP such as IP address and connected tags. 
Some AP's have an interface to connect a Flashing-jig, for flashing the tags. 
There are also bluetooth tags and sub-ghz, some of the AP's can handle these as well. I have not played with these, or done any investigation.

=== Out of the box ===
Hook up the USB-cable to your PC. As usual with ESP32 devices, a serial port should appear (insert Pokemon reference, the port might no be wild though) 
Your AP device is probably already flashed, but I found that openepaperlink.de not only handles the flashing, but also setting the wifi-credentials in a nice web-ui (web-serial) 
When you have set your wifi, you can connect to the IP of the AP with your webbrowser of choice and start configuring!
The first tag you'll see, is usually the display/tag of the AP itself.

== Displays (Tags) ==
=== General ===
Random info
* The smaller displays could last a decade when updated twice per day in good RF (radio) conditions.

=== How to start ===
On receiving ready-flashed displays, they will be in deep sleep. 
To start the display, short the terminals by turning the batteries over. If you just pull the batteries out, the internal processor will probably keep running on the energy in the capacitor alone, as it barely uses energy in deep sleep. 
When putting in the batteries, it is recommended to put them on the lid, and push them in together with the lid. If you put them in one by one, there is a big chance of bouncing which results in improper startup of the processor.

=== Now the display starts to work ===
(Details on exact inner workings are on the github page of the project!) https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/RF-protocol 
After turning the displays on, basically the next events happen:
* The tag looks for an AP, and registers it's availability.
* The AP tells the display when to check in.

After you have set an image (or something that generates an image through the web-ui of the AP) the following events take place.
* When the tag checks in with the AP, to see if there is new content available.
* The AP responds that there is a new image.
* The tag requests the blocks of information.
* The AP transmits those
* If the tag doesn't fully receive some, it wil re-request those blocks.
* After fully receiving all the information, the tag confirms reception to the AP
* The AP tells the tag when to check in again, based on the settings in the AP. This can be in 40 seconds, 1 hour, or a few options in between. (I will add the specific options later) 
* The AP updates the preview in the web UI

If there is no new content:
* The AP just tells the tag when to check in again, based on the settings in the AP.

== On the topic of the RF-interface ==
As written before, the protocol written for these tags are using the IEEE 802.15.4 spec.
The image shows the overlap with the 802.11bgn wifi channels, choose wisely (and please add other tech running on these frequencies)

Suggestion; use 26. While 25 is also "outside" of the Wi-Fi channels, it is still caught in the sidelobe of channel 11 (of Wi-Fi). In case you're running Zigbee, 25 is recommended for that, as 26 is not universally supported.
[[File:Overlapping-IEEE-802154-and-IEEE-80211-channels.png|thumb|image from researchgate.net]]

== How to show stuff?!?! ==
=== The easy start ===
Go to the AP web ui, left-click the tag you want to change, and check the options that exist in the default firmware such as weather and date/time. 
There is an advanced section at the bottom to do things like putting the tag to "permanent" deep sleep (until you reset it) or clear a waiting image for a tag.

=== What works for me so far ===
What I have found to work (through the wiki) is POST-ing an image of the correct size through HTTP. Info on https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Image-upload
The size of the display and the mac-address can be found in the web-ui.

=== A web-socket ===
I am trying to figure out how to get the information from the AP. It should be available, as it is seen in the Home Assistant plugin... 
Info seems to be available via a websocket on '''ws://{host}/ws'''
Info about the tags shows up here when the tag checks in.

=== Home Assistant ===
There is a HACS plugin for Home Assistant, which makes it possible to control the AP and tags through HA automation and such.

== "DIY AP" ==
Some of us got DIY AP, I have not tried them yet, but I got the following instruction for getting them to work:

The DIY Set is currently not added to install.openepaperlink.de so it needs to be manual compiled from the source.
Thats not a problem and also not very complicated
It is this config that needs to be selected: 
https://github.com/OpenEPaperLink/OpenEPaperLink/blob/master/ESP32_AP-Flasher/platformio.ini#L441

And after flashing that the file system itself needs to be flashed as well via the PlatformIO "Upload Filesystem Image" button then it is the same state as if flashed via the WebFlasher

=== Case ===
==== Nemo's version:====
[[File:Testen en printen.png|400px]] 
https://www.printables.com/model/1133397-nemo-de-beun-epaper-access-point-case 

==== Bas' version ====
[[File:basopenepaperdiyapdoosje.jpeg|400px]]

https://github.com/sebastius/openepaper_diy_ap_doosje

https://makerworld.com/en/models/956364

== Links ==
Main wiki:
https://github.com/OpenEPaperLink/OpenEPaperLink 
List of most AP's
https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Building-an-Access-Point

Metameeting25x07x01

2025-07-02T13:28:40Z

Wheeze NL: /* Rondvraag, waar is iedereen mee bezig, wat te melden, waar hulp bij nodig? */

{{Event
|Name=Metameet
|DateStart=01 Jul 2025
|DateEnd=01 Jul 2025
|InfoLocation=RevSpace
|InfoOpen=20:15
}}

[[Category:Event]]
[[Category:Metameet]]

Vorige MetaMeet: [[Metameeting25x06x17]]
Volgende MetaMeet: [[Metameeting25x07x15]]

=Agenda=

Boots notuleert

Kartoffel kondigt aan

= Mededelingen van het bestuur =

Juerd: Financieel jaarverslag afgerond, f0x afgerond, ondertekend. Staat nog niet op de wiki. Soon™.

1) Zoeken iemand die kan nadenken over/plan verzinnen over afwatering bij put voor, watert slecht af, achterdeur/sparkshack, waardoor plas water ontstaat als het regent. Bijv. herbestrating? Put fixen waarschijnlijk geen optie, afgraven te intensief. Wie snapt bestrating, wie heeft een idee wat voor bedrijven daarvoor te benaderen, meld je. board@revspace.nl

2) Sparkshackdeur is aan vervanging toe, doe voorzichtig, zoek de juiste balans tussen zacht en hard dicht doen. Moet vervangen worden, spullen zijn gereed. Gezocht: mensen die willen schuren, gronden, lakken.
Mailen naar board@revspace.nl

3) Terugkerend thema; sparkshackdeur is langzaam fout gegaan, dingen die langzaam fout gaan merken we niet op want er is geen duidelijk moment – terugkerend ding. Met deelnemers, ruimte voor ruimte afgaan, per keer uur steken in “dingen checken”. Schouwronde.
Staat van onderhoud checken, controleren op bevestiging, is het nog veilig, gaat het nog mee. Als je bereid bent mee te werken; stuur mailtje board@revspace.nl
Af en toe uurtje/2 uurtjes, met elkaar kijken hoe het ervoor staat.

^3 dingen waar we hulp bij nodig hebben. Mail board@revspace.nl

= Rondvraag, waar is iedereen mee bezig, wat te melden, waar hulp bij nodig? =

FK: rp2040 runtime aan het schrijven in ada.

Boots: aan het notuleren en bezig met WHY.

Polyfloyd: boekhouding Bitlair omzetten naar Beancount, plaintext boekhouding, makkelijker dan gnucash. In git gebruiken.

Eightdot: te veel tegelijk, fietsen, evenement, WHY, grasmaaier, serendiep (WAR) elektrisch varend te krijgen.

Wheeze_NL: Dingen hacken voor WHY, Heftrucks, Radiocommunicatie en gps-trackers.

Peetz0r: behalve smelten, evenementje bij Alkmaar (WHY), belangrijke mededeling; het is sinds een paar minuten buiten koeler dan binnen.

BlackDragon: printen cybermanhelm, afkoelen van afgelopen jaar school, alle ECs binnen, volgend jaar verder, trip plannen .ch volgende week.

Brainsmoke: IKEA ledpaneel geüpgraded, is te koop, indicatie 90 EUR
En een toetsenbord gemaakt omdat ik niet kon kopen wat ie wilde. Bezig met USB-hubjes.

Mystery: bezig met OS boardje. Bezig met motionsensor. Gefrustreerd met borduurmachine.

Maxell: Linux aan het installeren, en USBstick was te groot .

Juerd: ik kan slecht tegen warm weer, WHY warehousedingen is meer werk NU dan gedacht, gaat veel tijd in zitten. Wat warehouse betreft; alles achter de vriezer is voor WHY, daar hangt rood-wit-lintje bij, dat communiceert dat je eraf moet blijven. Mogen we als RevSpace niet aanzitten. Als er iets nodig is, aan iemand van warehouse vragen.
Afblijven van deurplaten van sparkshack, liggen bij ingang, niet rechtop zetten, worden krom.
Als ledbanner zegt ventileer space; doe dat dan. Het is makkelijk; ramen en deuren open zetten.

CH23: ook bezig met WHY-dingen, warehouse, daar gaat veel van vrije tijd in. Zou bezig moeten zijn met solliciteren, gaat minder snel dan gewenst. Aan het 3D-printen, ontwerpjes maken. Nieuwe case zoeken voor sensorwatch. Beetje programmeren. Genieten van het weer.

Kartoffel: laatste maanden met bezig een klok, met electromechanische 7segmentdisplays.

= Meeting gesloten =

Servers

2025-06-04T14:58:57Z

Wheeze NL: /* librenms */ Yes, used by Wheeze_NL

Revspace has quite a collection of dedicated workstations and (virtual) servers. This page will attempt to list them as complete as possible:

= Physical =

== gateway ==

IP: 10.42.42.1

Gateway router/server. Intel Xeon E3-1240, 16 GiB RAM, 256 GiB SSD and 2x 1TB HDD(?) in software RAID0 backed by hardware RAID (???).

== vm1 ==

IP: 10.42.42.51

Main virtual machine host. Dell PowerEdge R710, Intel Xeon X5650, 188 GiB RAM, 2x 2TB SSD in software RAID0 backed by hardware RAID (???).

== mysteryplayer ==

IP: 10.42.66.3

One of the outputs for the [[Muzieksysteem]]. Raspberry pi, connected to the speakers.

= Virtual =

== grafiekjes ==

IP: 10.42.42.2

Hosts InfluxDB and Grafana at [https://revspace.nl/grafiekjes/ revspace.nl/grafiekjes].

== ldap2 ==

IP: 10.42.42.9

Hosts [[LDAP]] server.

== mosfet ==

IP: 10.42.62.2

Also known as flux. Hosts RADIUS server for [[Spacenet]].

== mediaserver ==

IP: 10.42.66.2

Hosts the media server running [[Muzieksysteem Squeezebox]].

== librenms ==

Hosts [https://www.librenms.org/ LibreNMS] for monitoring.

== shell ==

=== shell-sid ===

IP: 10.42.14.6

Shell server running Debian Sid.

=== shell-stretch ===

IP: 10.42.14.9

Shell server running Debian Stretch.

=== shell-bullseye ===

IP: 10.42.14.11

Shell server running Debian Bullseye.

= Obsolete =

See [[Servers/Obsolete]].

Doorduino3-Deuren

2025-05-03T11:20:48Z

Wheeze NL: voorlopig geen fietssleutelkastje

* doorduino-noord (10.42.42.47, debian 8)
** mystery
** keuken
** <s>spacefietssleutelkastje</s> extraspace
** doei
* doorduino-zuid (10.42.42.45, debian 8)
** achterdeur
** achievement
** sparkshack
** tuindeur
** opt-in
** opt-out
* doorduino-serverhok (10.42.42.42, openwrt)
** telecom

De uitcheckpunten bij de uitgangen gaan niet via een doorduino, maar via [[extradoei]].

WHY2025 meeting 2025-06-21

2025-03-21T14:28:36Z

Wheeze NL:

{{Event
|Name=WHY2025 Orga Meeting
|DateStart=21 June 2025
|DateEnd=21 June 2025
|InfoLocation=RevSpace
|InfoOpen=11:00 (TBD)
}}

Info en opgeven: https://wiki.why2025.org/Orga_Meet_21_June_2025

[[Category:Event]]

OpenDag2025

2025-03-20T16:21:02Z

Wheeze NL: Door een overdracht/deadline kan ik er niet bij zijn :-(

{{Event
|Name=OpenDag2025
|DateStart=29 March 2025
|DateEnd=29 March 2025
|InfoLocation=RevSpace
|InfoOpen=11:00
}}
{{NewsItem
|Name=Jaarlijkse open Hackerspaces dag (2025)
|Date=2025-03-29
|Info=''Op zaterdag 29 maart kan iedereen weer vrij binnenlopen in een hackerspace. Tijdens deze open dag is het mogelijk om te zien wat bijvoorbeeld hacken inhoudt en te zien wat er allemaal kan in een hackerspace.''

}}
==Flyer==

== Organisatie ==

Landelijk ingegeven via: https://hackerspaces.nl/open-dag/

RevSpace doet uiteraard ook mee.

=== Aanwezigen ===

Om zeker te weten dat we met genoeg mensen zijn, een lijstje van revspacers die hebben toegezegd te komen om bezoekers te ontvangen:

{|class=wikitable
! Naam !! Van-tot !! Opmerkingen
|-
| Sebastius || 11.00 - laat || Rondleiden, lasercutten, algemeen knutselen
|-
| Atoomnet || 11.00 - laat || Meegenomen project over praten met geintresseerden
|-
| Peetz0r || 11.00 - laat || Algemeen aanwezig zijn
|-
| janlugt || TBD || Algemeen aanwezig zijn
|-
| Jij?
|-
|}

=== Promotie ===
*
* Wie contacteert welke krant/influencer/etc? Wie flyert in welke wijk/locatie/etc?
* Jij doet??

=== Activiteiten ===
* Rondleidingen langs onze werkplaatsen, apparatuur en projecten.
* Op verzoek: demonstratie van apparatuur zoals lasersnijder, 3D-printer, foliesnijder, oscilloscoop, etc...
* Sleutelhanger maken/graveren met de lasersnijder

OpenDag2025

2025-03-18T20:53:58Z

Wheeze NL: /* Aanwezigen */

{{Event
|Name=OpenDag2025
|DateStart=29 March 2025
|DateEnd=29 March 2025
|InfoLocation=RevSpace
|InfoOpen=11:00
}}
{{NewsItem
|Name=Jaarlijkse open Hackerspaces dag (2025)
|Date=2025-03-29
|Info=''Op zaterdag 29 maart kan iedereen weer vrij binnenlopen in een hackerspace. Tijdens deze open dag is het mogelijk om te zien wat bijvoorbeeld hacken inhoudt en te zien wat er allemaal kan in een hackerspace.''

}}
==Flyer==

== Organisatie ==

Landelijk ingegeven via: https://hackerspaces.nl/open-dag/

RevSpace doet uiteraard ook mee.

=== Aanwezigen ===

Om zeker te weten dat we met genoeg mensen zijn, een lijstje van revspacers die hebben toegezegd te komen om bezoekers te ontvangen:

{|class=wikitable
! Naam !! Van-tot !! Opmerkingen
|-
| Sebastius || 11.00 - laat || Rondleiden, lasercutten, algemeen knutselen
|-
| Atoomnet || 11.00 - laat || Meegenomen project over praten met geintresseerden
|-
| Peetz0r || 11.00 - laat || Algemeen aanwezig zijn
|-
| janlugt || TBD || Algemeen aanwezig zijn
|-
| Wheeze_NL || Afhankelijk van transport enzo || Enthausiaste deelnemer
|-
| Jij?
|-
|}

=== Promotie ===
*
* Wie contacteert welke krant/influencer/etc? Wie flyert in welke wijk/locatie/etc?
* Jij doet??

=== Activiteiten ===
* Rondleidingen langs onze werkplaatsen, apparatuur en projecten.
* Op verzoek: demonstratie van apparatuur zoals lasersnijder, 3D-printer, foliesnijder, oscilloscoop, etc...
* Sleutelhanger maken/graveren met de lasersnijder

Dingen

2025-01-24T23:46:33Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!hostname indien obscuur!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || esp32-arduino || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Geigercounter||ESP_83C142||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|openepaperlink || - || Space || Koelkast hoofdruimte || webinterface
|-
| Snuffelaar || x || - || achievement ||
|-
| Snuffelaar || x || - || mystery ||
|-
| Snuffelaar || x || - || lounge ||
|-
| Snuffelaar || x || - || keuken ||
|-
| Snuffelaar || x || - || werkplaats ||
|-
| co2-sensor || x || - || mystery
|-
| co2-sensor || x || - || keuken
|-
| co2-sensor || x || - || lounge (achter stellingkast)
|-
| operame || x || - || lounge
|-
| esp-ledsign || x || Bertrik || keuken
|-
| esp-ledsign || x || Bertrik || lounge
|-
| datumknop || (IP hardcoded 10.4.2.11) || Juerd || supersamla
|-
| cam2 || - || - || keuken || staat nog op verkeerd IP, moet naar dhcp
|-
| oranje labelprinter || - || space || gereedschapbord hoofdruimte
|-
| decenniumbadge || - || - || galerijplankje
|-
| deposniet || - || Juerd || statiegeld
|-
| fancontroller || - || Juerd || hoofdruimte || - || SHA Badge Serial
|-
| lasercutter timer || - || - || hoofdruimte || - || SHA Badge Serial
|-
| deurbelontvanger || - || - || werkplaats || - || SHA Badge Serial
|-
|}

Omzetten SHA Badge Dingen:
* Ctrl + c tijdens boot om bij python prompt te komen.
* import badge
* badge.nvs_set_str('badge', "wifi.ssid", "revspace-dingen")
* badge.nvs_set_str('badge', 'wifi.password', '$password')

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|andere nomzknop || ? || keuken
|-
|Intakefan 84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
| deurbel || Bas || boven spacestateschakelaar
|-
| spaceloop || - || intakefan
|-
| datumstickerprinter
|-
| ledbalk || Bas || boven soldeertafel
|-
| netvuil || jelly || gereedschapbord hoofdruimte
|-
| mainsfrequency || bertrik, peetz0r || gereedschapbord hoofdruimte
|-
| vrieskist-thermometer || ?? || linker vrieskist keuken
|-
| lichtgordijn || - || garagedeur
|-
| flipdot || Bas || hoofdruimte
|-
| bambu x1c || - || hoofdruimte
|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Dingen

2025-01-24T23:42:39Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!hostname indien obscuur!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || esp32-arduino || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Geigercounter||ESP_83C142||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|openepaperlink || - || Space || Koelkast hoofdruimte || webinterface
|-
| Snuffelaar || x || - || achievement ||
|-
| Snuffelaar || x || - || mystery ||
|-
| Snuffelaar || x || - || lounge ||
|-
| Snuffelaar || x || - || keuken ||
|-
| Snuffelaar || x || - || werkplaats ||
|-
| co2-sensor || x || - || mystery
|-
| co2-sensor || x || - || keuken
|-
| co2-sensor || x || - || lounge (achter stellingkast)
|-
| operame || x || - || lounge
|-
| esp-ledsign || x || Bertrik || keuken
|-
| esp-ledsign || x || Bertrik || lounge
|-
| datumknop || (IP hardcoded 10.4.2.11) || Juerd || supersamla
|-
| cam2 || - || - || keuken || staat nog op verkeerd IP, moet naar dhcp
|-
| oranje labelprinter || - || space || gereedschapbord hoofdruimte
|-
| decenniumbadge || - || - || galerijplankje
|-
| deposniet || - || Juerd || statiegeld
|-
| fancontroller || - || Juerd || hoofdruimte || - || SHA Badge Serial
|-
| lasercutter timer || - || - || hoofdruimte || - || SHA Badge Serial
|-
| deurbelontvanger || - || - || werkplaats || - || SHA Badge Serial
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|andere nomzknop || ? || keuken
|-
|Intakefan 84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
| deurbel || Bas || boven spacestateschakelaar
|-
| spaceloop || - || intakefan
|-
| datumstickerprinter
|-
| ledbalk || Bas || boven soldeertafel
|-
| netvuil || jelly || gereedschapbord hoofdruimte
|-
| mainsfrequency || bertrik, peetz0r || gereedschapbord hoofdruimte
|-
| vrieskist-thermometer || ?? || linker vrieskist keuken
|-
| lichtgordijn || - || garagedeur
|-
| flipdot || Bas || hoofdruimte
|-
| bambu x1c || - || hoofdruimte
|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Dingen

2025-01-24T23:40:12Z

Wheeze NL:

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!hostname indien obscuur!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || esp32-arduino || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Geigercounter||ESP_83C142||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|openepaperlink || - || Space || Koelkast hoofdruimte || webinterface
|-
| Snuffelaar || x || - || achievement ||
|-
| Snuffelaar || x || - || mystery ||
|-
| Snuffelaar || x || - || lounge ||
|-
| Snuffelaar || x || - || keuken ||
|-
| Snuffelaar || x || - || werkplaats ||
|-
| co2-sensor || x || - || mystery
|-
| co2-sensor || x || - || keuken
|-
| co2-sensor || x || - || lounge (achter stellingkast)
|-
| operame || x || - || lounge
|-
| esp-ledsign || x || Bertrik || keuken
|-
| esp-ledsign || x || Bertrik || lounge
|-
| datumknop || (IP hardcoded 10.4.2.11) || Juerd || supersamla
|-
| cam2 || - || - || keuken || staat nog op verkeerd IP, moet naar dhcp
|-
| oranje labelprinter || - || space || gereedschapbord hoofdruimte
|-
| decenniumbadge || - || - || galerijplankje
|-
| deposniet || - || Juerd || statiegeld
|-
| fancontroller || - || Juerd || hoofdruimte
|-
| lasercutter timer || - || - || hoofdruimte
|-
| deurbelontvanger || - || - || werkplaats
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|andere nomzknop || ? || keuken
|-
|Intakefan 84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
| deurbel || Bas || boven spacestateschakelaar
|-
| spaceloop || - || intakefan
|-
| datumstickerprinter
|-
| ledbalk || Bas || boven soldeertafel
|-
| netvuil || jelly || gereedschapbord hoofdruimte
|-
| mainsfrequency || bertrik, peetz0r || gereedschapbord hoofdruimte
|-
| vrieskist-thermometer || ?? || linker vrieskist keuken
|-
| lichtgordijn || - || garagedeur
|-
| flipdot || Bas || hoofdruimte
|-
| bambu x1c || - || hoofdruimte
|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Dingen

2025-01-24T23:34:01Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!hostname indien obscuur!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || esp32-arduino || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Geigercounter||ESP_83C142||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|openepaperlink || - || Space || Koelkast hoofdruimte || webinterface
|-
| Snuffelaar || x || - || achievement ||
|-
| Snuffelaar || x || - || mystery ||
|-
| Snuffelaar || x || - || lounge ||
|-
| Snuffelaar || x || - || keuken ||
|-
| Snuffelaar || x || - || werkplaats ||
|-
| co2-sensor || x || - || mystery
|-
| co2-sensor || x || - || keuken
|-
| co2-sensor || x || - || lounge (achter stellingkast)
|-
| operame || x || - || lounge
|-
| esp-ledsign || x || Bertrik || keuken
|-
| esp-ledsign || x || Bertrik || lounge
|-
| datumknop || (IP hardcoded 10.4.2.11) || Juerd || supersamla
|-
| cam2 || - || - || keuken || staat nog op verkeerd IP, moet naar dhcp
|-
| oranje labelprinter || - || space || gereedschapbord hoofdruimte
|-
| decenniumbadge || - || - || galerijplankje
|-
| deposniet || - || Juerd || statiegeld
|-
| fancontroller || - || Juerd || hoofdruimte
|-
| lasercutter timer || - || - || hoofdruimte
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|andere nomzknop || ? || keuken
|-
|Intakefan 84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
| deurbel || Bas || boven spacestateschakelaar
|-
| spaceloop || - || intakefan
|-
| datumstickerprinter
|-
| deurbelontvanger || - || werkplaats
|-
| ledbalk || Bas || boven soldeertafel
|-
| netvuil || jelly || gereedschapbord hoofdruimte
|-
| mainsfrequency || bertrik, peetz0r || gereedschapbord hoofdruimte
|-
| vrieskist-thermometer || ?? || linker vrieskist keuken
|-
| lichtgordijn || - || garagedeur
|-
| flipdot || Bas || hoofdruimte
|-
| bambu x1c || - || hoofdruimte
|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Dingen

2025-01-24T23:30:56Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!hostname indien obscuur!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || esp32-arduino || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Geigercounter||ESP_83C142||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|openepaperlink || - || Space || Koelkast hoofdruimte || webinterface
|-
| Snuffelaar || x || - || achievement ||
|-
| Snuffelaar || x || - || mystery ||
|-
| Snuffelaar || x || - || lounge ||
|-
| Snuffelaar || x || - || keuken ||
|-
| Snuffelaar || x || - || werkplaats ||
|-
| co2-sensor || x || - || mystery
|-
| co2-sensor || x || - || keuken
|-
| co2-sensor || x || - || lounge (achter stellingkast)
|-
| operame || x || - || lounge
|-
| esp-ledsign || x || Bertrik || keuken
|-
| esp-ledsign || x || Bertrik || lounge
|-
| datumknop || (IP hardcoded 10.4.2.11) || Juerd || supersamla
|-
| cam2 || - || - || keuken || staat nog op verkeerd IP, moet naar dhcp
|-
| oranje labelprinter || - || space || gereedschapbord hoofdruimte
|-
| decenniumbadge || - || - || galerijplankje
|-
| deposniet || - || Juerd || statiegeld
|-
| fancontroller || - || Juerd || hoofdruimte
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|andere nomzknop || ? || keuken
|-
|Intakefan 84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
| deurbel || Bas || boven spacestateschakelaar
|-
| spaceloop || - || intakefan
|-
| datumstickerprinter
|-
| deurbelontvanger || - || werkplaats
|-
| ledbalk || Bas || boven soldeertafel
|-
| netvuil || jelly || gereedschapbord hoofdruimte
|-
| mainsfrequency || bertrik, peetz0r || gereedschapbord hoofdruimte
|-
| vrieskist-thermometer || ?? || linker vrieskist keuken
|-
| lichtgordijn || - || garagedeur
|-
| flipdot || Bas || hoofdruimte
|-
| bambu x1c || - || hoofdruimte
|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Dingen

2025-01-24T23:30:45Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!hostname indien obscuur!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || esp32-arduino || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Geigercounter||ESP_83C142||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|openepaperlink || - || Space || Koelkast hoofdruimte || webinterface
|-
| Snuffelaar || x || - || achievement ||
|-
| Snuffelaar || x || - || mystery ||
|-
| Snuffelaar || x || - || lounge ||
|-
| Snuffelaar || x || - || keuken ||
|-
| Snuffelaar || x || - || werkplaats ||
|-
| co2-sensor || x || - || mystery
|-
| co2-sensor || x || - || keuken
|-
| co2-sensor || x || - || lounge (achter stellingkast)
|-
| operame || x || - || lounge
|-
| esp-ledsign || x || Bertrik || keuken
|-
| esp-ledsign || x || Bertrik || lounge
|-
| datumknop || (IP hardcoded 10.4.2.11) || Juerd || supersamla
|-
| cam2 || - || - || keuken || staat nog op verkeerd IP, moet naar dhcp
|-
| oranje labelprinter || - || space || gereedschapbord hoofdruimte
|-
| decenniumbadge || - || - || galerijplankje
|-
| deposniet || - || Juerd || statiegeld
|-
| fancontroller || - || - || Juerd || hoofdruimte
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|andere nomzknop || ? || keuken
|-
|Intakefan 84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
| deurbel || Bas || boven spacestateschakelaar
|-
| spaceloop || - || intakefan
|-
| datumstickerprinter
|-
| deurbelontvanger || - || werkplaats
|-
| ledbalk || Bas || boven soldeertafel
|-
| netvuil || jelly || gereedschapbord hoofdruimte
|-
| mainsfrequency || bertrik, peetz0r || gereedschapbord hoofdruimte
|-
| vrieskist-thermometer || ?? || linker vrieskist keuken
|-
| lichtgordijn || - || garagedeur
|-
| flipdot || Bas || hoofdruimte
|-
| bambu x1c || - || hoofdruimte
|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Dingen

2025-01-24T23:29:58Z

Wheeze NL: /* Dingen op het oude revspace-pub open netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!hostname indien obscuur!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || esp32-arduino || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Geigercounter||ESP_83C142||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|openepaperlink || - || Space || Koelkast hoofdruimte || webinterface
|-
| Snuffelaar || x || - || achievement ||
|-
| Snuffelaar || x || - || mystery ||
|-
| Snuffelaar || x || - || lounge ||
|-
| Snuffelaar || x || - || keuken ||
|-
| Snuffelaar || x || - || werkplaats ||
|-
| co2-sensor || x || - || mystery
|-
| co2-sensor || x || - || keuken
|-
| co2-sensor || x || - || lounge (achter stellingkast)
|-
| operame || x || - || lounge
|-
| esp-ledsign || x || Bertrik || keuken
|-
| esp-ledsign || x || Bertrik || lounge
|-
| datumknop || (IP hardcoded 10.4.2.11) || Juerd || supersamla
|-
| cam2 || - || - || keuken || staat nog op verkeerd IP, moet naar dhcp
|-
| oranje labelprinter || - || space || gereedschapbord hoofdruimte
|-
| decenniumbadge || - || - || galerijplankje
|-
| deposniet || - || Juerd || statiegeld
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|andere nomzknop || ? || keuken
|-
|Intakefan 84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
| deurbel || Bas || boven spacestateschakelaar
|-
| spaceloop || - || intakefan
|-
| datumstickerprinter
|-
| deurbelontvanger || - || werkplaats
|-
| ledbalk || Bas || boven soldeertafel
|-
| netvuil || jelly || gereedschapbord hoofdruimte
|-
| mainsfrequency || bertrik, peetz0r || gereedschapbord hoofdruimte
|-
| vrieskist-thermometer || ?? || linker vrieskist keuken
|-
| lichtgordijn || - || garagedeur
|-
| flipdot || Bas || hoofdruimte
|-
| bambu x1c || - || hoofdruimte
|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Galerij

2025-01-23T19:24:53Z

Wheeze NL: /* Plank 8 */

Dit is het kunstplankjes beheersysteem. Elk half uur checken de infotags deze wikipagina en werken zichzelf bij. Handmatig resetten/powercyclen werkt ook.

Instructie:
* Heading 1 is de unique badge identifier (zet de badge nickname op deze titel). Verander deze niet!
* Heading 3 is de projectnaam.
* Maker: , Omschrijving: en Datum: op aparte regels en ze worden verwerkt in de code.
* Plaatje ergens toevoegen, max 128x128. Kleiner gaat goed, groter zorgt voor afknippen (vertikaal) en crashes (geheugen vol).

=Plank 1=
===WIPcam===
Maker: jij!

Datum: 2018

Omschrijving: Maak een foto van je Work In Progress (en andere leuke dingen) en deel automatisch foto's op de website. Vraag toestemming voordat je iemands privacy schendt!

=Plank 2=
===Energy-ring===
Maker: bertrik

Datum: 2022-11-13

Omschrijving: Shows current Dutch electricity generation mix by source, YELLOW:Solar BLUE:Wind RED:Fossil GREEN:Nuclear PURPLE:Other

=Plank 3=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 4=
===Decenium Badge===
Maker: Juerd, Sebastius, F0x

Datum: 2020-01-09

Omschrijving: https://revspace.nl/Decennium

=Plank 5=
===TuxDroidHacking===
Maker: gny

Datum: ???

Omschrijving: https://revspace.nl/TuxDroidHacking

=Plank 6=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 7=
===Waving Lucky Cat===
Maker: jelly

Datum: 23-09-2017

Omschrijving: Cat waves for 10 seconds when someone watches cam 4.

No touchy!

=Plank 8=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 9=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 10=
===Testobject===
Maker: Sebastius

Datum: 2018

Omschrijving: Dit is een zooitje maar wel een goede test.

Galerij

2025-01-23T19:24:04Z

Wheeze NL: /* Plank 5 */

Dit is het kunstplankjes beheersysteem. Elk half uur checken de infotags deze wikipagina en werken zichzelf bij. Handmatig resetten/powercyclen werkt ook.

Instructie:
* Heading 1 is de unique badge identifier (zet de badge nickname op deze titel). Verander deze niet!
* Heading 3 is de projectnaam.
* Maker: , Omschrijving: en Datum: op aparte regels en ze worden verwerkt in de code.
* Plaatje ergens toevoegen, max 128x128. Kleiner gaat goed, groter zorgt voor afknippen (vertikaal) en crashes (geheugen vol).

=Plank 1=
===WIPcam===
Maker: jij!

Datum: 2018

Omschrijving: Maak een foto van je Work In Progress (en andere leuke dingen) en deel automatisch foto's op de website. Vraag toestemming voordat je iemands privacy schendt!

=Plank 2=
===Energy-ring===
Maker: bertrik

Datum: 2022-11-13

Omschrijving: Shows current Dutch electricity generation mix by source, YELLOW:Solar BLUE:Wind RED:Fossil GREEN:Nuclear PURPLE:Other

=Plank 3=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 4=
===Decenium Badge===
Maker: Juerd, Sebastius, F0x

Datum: 2020-01-09

Omschrijving: https://revspace.nl/Decennium

=Plank 5=
===TuxDroidHacking===
Maker: gny

Datum: ???

Omschrijving: https://revspace.nl/TuxDroidHacking

=Plank 6=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 7=
===Waving Lucky Cat===
Maker: jelly

Datum: 23-09-2017

Omschrijving: Cat waves for 10 seconds when someone watches cam 4.

No touchy!

=Plank 8=
===Stempel===
Maker: Sebastius

Datum: 2020-01-19

Omschrijving: Een eerste poging stempels te maken met de lasercutter. Speciaal 'laserrubber' aangeschaft hiervoor.

=Plank 9=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 10=
===Testobject===
Maker: Sebastius

Datum: 2018

Omschrijving: Dit is een zooitje maar wel een goede test.

Galerij

2025-01-23T19:22:48Z

Wheeze NL: /* Plank 6 */

Dit is het kunstplankjes beheersysteem. Elk half uur checken de infotags deze wikipagina en werken zichzelf bij. Handmatig resetten/powercyclen werkt ook.

Instructie:
* Heading 1 is de unique badge identifier (zet de badge nickname op deze titel). Verander deze niet!
* Heading 3 is de projectnaam.
* Maker: , Omschrijving: en Datum: op aparte regels en ze worden verwerkt in de code.
* Plaatje ergens toevoegen, max 128x128. Kleiner gaat goed, groter zorgt voor afknippen (vertikaal) en crashes (geheugen vol).

=Plank 1=
===WIPcam===
Maker: jij!

Datum: 2018

Omschrijving: Maak een foto van je Work In Progress (en andere leuke dingen) en deel automatisch foto's op de website. Vraag toestemming voordat je iemands privacy schendt!

=Plank 2=
===Energy-ring===
Maker: bertrik

Datum: 2022-11-13

Omschrijving: Shows current Dutch electricity generation mix by source, YELLOW:Solar BLUE:Wind RED:Fossil GREEN:Nuclear PURPLE:Other

=Plank 3=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 4=
===Decenium Badge===
Maker: Juerd, Sebastius, F0x

Datum: 2020-01-09

Omschrijving: https://revspace.nl/Decennium

=Plank 5=
===Steen en hout===
Maker: Gori en Molenaar

Datum: 2019-04-09

Omschrijving: From Dirt To Space en Lichtenberg figuren

=Plank 6=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 7=
===Waving Lucky Cat===
Maker: jelly

Datum: 23-09-2017

Omschrijving: Cat waves for 10 seconds when someone watches cam 4.

No touchy!

=Plank 8=
===Stempel===
Maker: Sebastius

Datum: 2020-01-19

Omschrijving: Een eerste poging stempels te maken met de lasercutter. Speciaal 'laserrubber' aangeschaft hiervoor.

=Plank 9=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 10=
===Testobject===
Maker: Sebastius

Datum: 2018

Omschrijving: Dit is een zooitje maar wel een goede test.

Galerij

2025-01-23T19:21:51Z

Wheeze NL: /* Uw project hier */

Dit is het kunstplankjes beheersysteem. Elk half uur checken de infotags deze wikipagina en werken zichzelf bij. Handmatig resetten/powercyclen werkt ook.

Instructie:
* Heading 1 is de unique badge identifier (zet de badge nickname op deze titel). Verander deze niet!
* Heading 3 is de projectnaam.
* Maker: , Omschrijving: en Datum: op aparte regels en ze worden verwerkt in de code.
* Plaatje ergens toevoegen, max 128x128. Kleiner gaat goed, groter zorgt voor afknippen (vertikaal) en crashes (geheugen vol).

=Plank 1=
===WIPcam===
Maker: jij!

Datum: 2018

Omschrijving: Maak een foto van je Work In Progress (en andere leuke dingen) en deel automatisch foto's op de website. Vraag toestemming voordat je iemands privacy schendt!

=Plank 2=
===Energy-ring===
Maker: bertrik

Datum: 2022-11-13

Omschrijving: Shows current Dutch electricity generation mix by source, YELLOW:Solar BLUE:Wind RED:Fossil GREEN:Nuclear PURPLE:Other

=Plank 3=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 4=
===Decenium Badge===
Maker: Juerd, Sebastius, F0x

Datum: 2020-01-09

Omschrijving: https://revspace.nl/Decennium

=Plank 5=
===Steen en hout===
Maker: Gori en Molenaar

Datum: 2019-04-09

Omschrijving: From Dirt To Space en Lichtenberg figuren

=Plank 6=
===The Monolith===
Maker: CH23

Datum: 2024-05

Omschrijving: SHA2017 badge, als weerstation. software: Rain (Kartoffel) case: Monolith (CH23)

=Plank 7=
===Waving Lucky Cat===
Maker: jelly

Datum: 23-09-2017

Omschrijving: Cat waves for 10 seconds when someone watches cam 4.

No touchy!

=Plank 8=
===Stempel===
Maker: Sebastius

Datum: 2020-01-19

Omschrijving: Een eerste poging stempels te maken met de lasercutter. Speciaal 'laserrubber' aangeschaft hiervoor.

=Plank 9=
===Uw project hier===
Maker: Herman Acker

Datum: 1337-04-20

Omschrijving: revspace.nl/Galerij

=Plank 10=
===Testobject===
Maker: Sebastius

Datum: 2018

Omschrijving: Dit is een zooitje maar wel een goede test.

Dingen

2025-01-22T13:56:57Z

Wheeze NL: /* Dingen bedraad */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || 24:0a:c4:13:2b:5c || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Intakefan||84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
|Geigercounter||5c:cf:7f:83:c1:42||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop

|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!netwerk!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||LAN||geen ('t is een pi met een browser)
|}

Dingen

2025-01-22T13:56:12Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || 24:0a:c4:13:2b:5c || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Intakefan||84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
|Geigercounter||5c:cf:7f:83:c1:42||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| Serieel ||
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop

|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||geen ('t is een pi met een browser)
|}

Dingen

2025-01-22T13:55:57Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || 24:0a:c4:13:2b:5c || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Intakefan||84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
|Geigercounter||5c:cf:7f:83:c1:42||Space||Werkplaats|| ||
|-
|https://revspace.nl/Galerij||diverse||Bas||Hoofdruimte|| ||
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop

|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||geen ('t is een pi met een browser)
|}

Dingen

2025-01-22T01:03:37Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || 24:0a:c4:13:2b:5c || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Intakefan||84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|-
|Geigercounter||5c:cf:7f:83:c1:42||Space||Werkplaats|| ||
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop

|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||geen ('t is een pi met een browser)
|}

Dingen

2025-01-22T00:20:52Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || 24:0a:c4:13:2b:5c || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||keuken, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||werkplaats, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_tv, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte_bar, boven het plafond||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Intakefan||84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop

|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||geen ('t is een pi met een browser)
|}

Dingen

2025-01-22T00:19:52Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || 24:0a:c4:13:2b:5c || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||boven het plafond, keuken||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||boven het plafond, werkplaats||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||boven het plafond, hoofdruimte_tv||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||boven het plafond, hoofdruimte_bar||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|-
|Intakefan||84:f3:eb:77:0d:35||Space||Werkplaats|| ||
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop

|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||geen ('t is een pi met een browser)
|}

Dingen

2025-01-21T23:34:50Z

Wheeze NL: /* Dingen bedraad */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)!!OTA/Setup
|-
| ExtraDoei || || Space || Gang || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Tuindeur || Github RevSpace || WiFiSettings
|-
| ExtraDoei || || Space || Roldeur || Github RevSpace || WiFiSettings
|-
| vollamp || 24:0a:c4:13:2b:5c || Juerd || Roldeur || - || WiFiSettings
|-
| ledspace || ? || f0x, Juerd || hoek hoofdruimte links van tv || - || /etc/network/interfaces
|-
| shelly 3EM || ? || space || groepenkast hoofdruimte || [[elektra]] || webinterface
|-
|lichtstate|| ||Peetz0r||boven het plafond, keuken||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||idem, werkplaats||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||idem, hoofdruimte_tv||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||idem, hoofdruimte_bar||https://github.com/revspace/lichtknop (other)||config.h
|-
|lichtstate|| ||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)||config.h
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!maintainer!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop

|}

== Dingen bedraad ==

{| class="wikitable"
!Ding!!MAC-Adres!!maintainer!!locatie!!documentatie (of code)
|-
|raspberry pi dashboard||||Peetz0r||boven statiegeld||geen ('t is een pi met een browser)
|}

Dingen

2025-01-21T21:53:38Z

Wheeze NL: /* Dingen op het oude revspace-pub open netwerk */

Dingen

2025-01-21T21:53:18Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Dingen

2025-01-21T21:53:05Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Dingen

2025-01-21T20:50:42Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Dingen

2025-01-21T20:47:45Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!eigenaar!!locatie!!documentatie (of code)!!OTA
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!eigenaar!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|lichtstate||Peetz0r||boven het plafond, keuken||https://github.com/revspace/lichtknop (other)
|-
|lichtstate||Peetz0r||idem, werkplaats||https://github.com/revspace/lichtknop (other)
|-
|lichtstate||Peetz0r||idem, hoofdruimte (minderlicht)||https://github.com/revspace/lichtknop (other)
|-
|lichtstate||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)

|}

Dingen

2025-01-21T20:45:13Z

Wheeze NL: /* Dingen op het nieuwe revspace-dingen netwerk */

Lijst der dingen op het <del>internet</del> lokaal netwerk der dingen

== Dingen op het nieuwe <code>revspace-dingen</code> netwerk ==
{| class="wikitable"
!Ding!!MAC-Adres!!eigenaar!!locatie!!documentatie (of code)
|-
|}

== Dingen op het oude <code>revspace-pub</code> open netwerk ==

(inclusief <code>revspace-pub-2.4ghz</code> of misschien zelfs <code>revspace-pub-5ghz</code>)

{| class="wikitable"
!Ding!!eigenaar!!locatie!!documentatie (of code)
|-
|Nomzknop||Peetz0r||rechts van soldeertafel||https://github.com/revspace/nomzknop
|-
|lichtstate||Peetz0r||boven het plafond, keuken||https://github.com/revspace/lichtknop (other)
|-
|lichtstate||Peetz0r||idem, werkplaats||https://github.com/revspace/lichtknop (other)
|-
|lichtstate||Peetz0r||idem, hoofdruimte (minderlicht)||https://github.com/revspace/lichtknop (other)
|-
|lichtstate||Peetz0r||hoofdruimte, rechts van de contactors||https://github.com/revspace/lichtknop (hoofdruimte)

|}

OpenEPaperLink

2025-01-07T19:29:25Z

Wheeze NL:

{{Project
|Name=OpenEPaperLink
|Picture=EpaperGroupbuy.JPG
|Omschrijving=Gathering info to make getting started with OpenEPaperLink easier.
|Status=Initializing
|Contact=Wheeze_NL
}}

Info for tags and AP sold in https://revspace.nl/Epaperinkoop

== This is just a Wheeze_NL braindump for now, it might help you get started ==
There is a very nice project, reusing epaper pricetags from grocery-shops etc. 
The project is called OpenEPaperLink and was kickstarted by dmitri.gr who reversed engineered the firmware and created a new open-source firmware for Solum pricetags. 
A lot of work was also done by Atc1441 (I need to check if I remembered this correctly, and who else has added a lot to the project)

All the information I am trying to make easier to grasp here for beginners, is based on this project, not the original firmware or usage.

== The Access Point (AP) ==
=== General info ===
The access point (AP) usually consists of an ESP32-S2 or ESP32-S3 and second unit like the ESP32-C6. 
The first ESP32 connects to the wifi, the second unit "talks" to the displays over the the IEEE 802.15.4 standard on 2.4Ghz (channel can be auto or selected, probably not exactly the wifi-channels, tbd.) 
The ESP32-S2 can handle about 30 tags, the ESP32-S3 can handle a few hundred. If you have many tags, disable preview in the web interface to save data. 
The simplest AP is a ESP32 with a display as an AP, this has limited coverage due to shitty internal antennas in the tags. 
Many AP's have a tag or another little display for showing the status of the AP such as IP address and connected tags. 
Some AP's have an interface to connect a Flashing-jig, for flashing the tags. 
There are also bluetooth tags and sub-ghz, some of the AP's can handle these as well. I have not played with these, or done any investigation.

=== Out of the box ===
Hook up the USB-cable to your PC. As usual with ESP32 devices, a serial port should appear (insert Pokemon reference, the port might no be wild though) 
Your AP device is probably already flashed, but I found that openepaperlink.de not only handles the flashing, but also setting the wifi-credentials in a nice web-ui (web-serial) 
When you have set your wifi, you can connect to the IP of the AP with your webbrowser of choice and start configuring!
The first tag you'll see, is usually the display/tag of the AP itself.

== Displays (Tags) ==
=== General ===
Random info
* The smaller displays could last a decade when updated twice per day in good RF (radio) conditions.

=== How to start ===
On receiving ready-flashed displays, they will be in deep sleep. 
To start the display, short the terminals by turning the batteries over. If you just pull the batteries out, the internal processor will probably keep running on the energy in the capacitor alone, as it barely uses energy in deep sleep. 
When putting in the batteries, it is recommended to put them on the lid, and push them in together with the lid. If you put them in one by one, there is a big chance of bouncing which results in improper startup of the processor.

=== Now the display starts to work ===
(Details on exact inner workings are on the github page of the project!) https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/RF-protocol 
After turning the displays on, basically the next events happen:
* The tag looks for an AP, and registers it's availability.
* The AP tells the display when to check in.

After you have set an image (or something that generates an image through the web-ui of the AP) the following events take place.
* When the tag checks in with the AP, to see if there is new content available.
* The AP responds that there is a new image.
* The tag requests the blocks of information.
* The AP transmits those
* If the tag doesn't fully receive some, it wil re-request those blocks.
* After fully receiving all the information, the tag confirms reception to the AP
* The AP tells the tag when to check in again, based on the settings in the AP. This can be in 40 seconds, 1 hour, or a few options in between. (I will add the specific options later) 
* The AP updates the preview in the web UI

If there is no new content:
* The AP just tells the tag when to check in again, based on the settings in the AP.

== On the topic of the RF-interface ==
As written before, the protocol written for these tags are using the IEEE 802.15.4 spec.
The image shows the overlap with the 802.11bgn wifi channels, choose wisely (and please add other tech running on these frequencies)
[[File:Overlapping-IEEE-802154-and-IEEE-80211-channels.png|thumb|image from researchgate.net]]

== How to show stuff?!?! ==
=== The easy start ===
Go to the AP web ui, left-click the tag you want to change, and check the options that exist in the default firmware such as weather and date/time. 
There is an advanced section at the bottom to do things like putting the tag to "permanent" deep sleep (until you reset it) or clear a waiting image for a tag.

=== What works for me so far ===
What I have found to work (through the wiki) is POST-ing an image of the correct size through HTTP. Info on https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Image-upload
The size of the display and the mac-address can be found in the web-ui.

=== A web-socket ===
I am trying to figure out how to get the information from the AP. It should be available, as it is seen in the Home Assistant plugin... 
Info seems to be available via a websocket on '''ws://{host}/ws'''
Info about the tags shows up here when the tag checks in.

=== Home Assistant ===
There is a HACS plugin for Home Assistant, which makes it possible to control the AP and tags through HA automation and such.

== "DIY AP" ==
Some of us got DIY AP, I have not tried them yet, but I got the following instruction for getting them to work:

The DIY Set is currently not added to install.openepaperlink.de so it needs to be manual compiled from the source.
Thats not a problem and also not very complicated
It is this config that needs to be selected: 
https://github.com/OpenEPaperLink/OpenEPaperLink/blob/master/ESP32_AP-Flasher/platformio.ini#L441

And after flashing that the file system itself needs to be flashed as well via the PlatformIO "Upload Filesystem Image" button then it is the same state as if flashed via the WebFlasher

=== Case ===
==== Nemo's version:====
[[File:Testen en printen.png|400px]] 
https://www.printables.com/model/1133397-nemo-de-beun-epaper-access-point-case 

==== Bas' version ====
[[File:basopenepaperdiyapdoosje.jpeg|400px]]

https://github.com/sebastius/openepaper_diy_ap_doosje

== Links ==
Main wiki:
https://github.com/OpenEPaperLink/OpenEPaperLink 
List of most AP's
https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Building-an-Access-Point

File:Overlapping-IEEE-802154-and-IEEE-80211-channels.png

2025-01-07T19:27:58Z

Wheeze NL:

Image showing Overlapping-IEEE-802154-and-IEEE-80211-channels from https://www.researchgate.net/figure/Overlapping-IEEE-802154-and-IEEE-80211-channels_fig1_321090231

OpenEPaperLink

2025-01-05T14:57:29Z

Wheeze NL: /* Case */

{{Project
|Name=OpenEPaperLink
|Picture=EpaperGroupbuy.JPG
|Omschrijving=Gathering info to make getting started with OpenEPaperLink easier.
|Status=Initializing
|Contact=Wheeze_NL
}}

Info for tags and AP sold in https://revspace.nl/Epaperinkoop

== This is just a Wheeze_NL braindump for now, it might help you get started ==
There is a very nice project, reusing epaper pricetags from grocery-shops etc. 
The project is called OpenEPaperLink and was kickstarted by dmitri.gr who reversed engineered the firmware and created a new open-source firmware for Solum pricetags. 
A lot of work was also done by Atc1441 (I need to check if I remembered this correctly, and who else has added a lot to the project)

All the information I am trying to make easier to grasp here for beginners, is based on this project, not the original firmware or usage.

== The Access Point (AP) ==
=== General info ===
The access point (AP) usually consists of an ESP32-S2 or ESP32-S3 and second unit like the ESP32-C6. 
The first ESP32 connects to the wifi, the second unit "talks" to the displays over the the IEEE 802.15.4 standard on 2.4Ghz (channel can be auto or selected, probably not exactly the wifi-channels, tbd.) 
The ESP32-S2 can handle about 30 tags, the ESP32-S3 can handle a few hundred. If you have many tags, disable preview in the web interface to save data. 
The simplest AP is a ESP32 with a display as an AP, this has limited coverage due to shitty internal antennas in the tags. 
Many AP's have a tag or another little display for showing the status of the AP such as IP address and connected tags. 
Some AP's have an interface to connect a Flashing-jig, for flashing the tags. 
There are also bluetooth tags and sub-ghz, some of the AP's can handle these as well. I have not played with these, or done any investigation.

=== Out of the box ===
Hook up the USB-cable to your PC. As usual with ESP32 devices, a serial port should appear (insert Pokemon reference, the port might no be wild though) 
Your AP device is probably already flashed, but I found that openepaperlink.de not only handles the flashing, but also setting the wifi-credentials in a nice web-ui (web-serial) 
When you have set your wifi, you can connect to the IP of the AP with your webbrowser of choice and start configuring!
The first tag you'll see, is usually the display/tag of the AP itself.

== Displays (Tags) ==
=== General ===
Random info
* The smaller displays could last a decade when updated twice per day in good RF (radio) conditions.

=== How to start ===
On receiving ready-flashed displays, they will be in deep sleep. 
To start the display, short the terminals by turning the batteries over. If you just pull the batteries out, the internal processor will probably keep running on the energy in the capacitor alone, as it barely uses energy in deep sleep. 
When putting in the batteries, it is recommended to put them on the lid, and push them in together with the lid. If you put them in one by one, there is a big chance of bouncing which results in improper startup of the processor.

=== Now the display starts to work ===
(Details on exact inner workings are on the github page of the project!) https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/RF-protocol 
After turning the displays on, basically the next events happen:
* The tag looks for an AP, and registers it's availability.
* The AP tells the display when to check in.

After you have set an image (or something that generates an image through the web-ui of the AP) the following events take place.
* When the tag checks in with the AP, to see if there is new content available.
* The AP responds that there is a new image.
* The tag requests the blocks of information.
* The AP transmits those
* If the tag doesn't fully receive some, it wil re-request those blocks.
* After fully receiving all the information, the tag confirms reception to the AP
* The AP tells the tag when to check in again, based on the settings in the AP. This can be in 40 seconds, 1 hour, or a few options in between. (I will add the specific options later) 
* The AP updates the preview in the web UI

If there is no new content:
* The AP just tells the tag when to check in again, based on the settings in the AP.

== How to show stuff?!?! ==
=== The easy start ===
Go to the AP web ui, left-click the tag you want to change, and check the options that exist in the default firmware such as weather and date/time. 
There is an advanced section at the bottom to do things like putting the tag to "permanent" deep sleep (until you reset it) or clear a waiting image for a tag.

=== What works for me so far ===
What I have found to work (through the wiki) is POST-ing an image of the correct size through HTTP. Info on https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Image-upload
The size of the display and the mac-address can be found in the web-ui.

=== A web-socket ===
I am trying to figure out how to get the information from the AP. It should be available, as it is seen in the Home Assistant plugin... 
Info seems to be available via a websocket on '''ws://{host}/ws'''
Info about the tags shows up here when the tag checks in.

=== Home Assistant ===
There is a HACS plugin for Home Assistant, which makes it possible to control the AP and tags through HA automation and such.

== "DIY AP" ==
Some of us got DIY AP, I have not tried them yet, but I got the following instruction for getting them to work:

The DIY Set is currently not added to install.openepaperlink.de so it needs to be manual compiled from the source.
Thats not a problem and also not very complicated
It is this config that needs to be selected: 
https://github.com/OpenEPaperLink/OpenEPaperLink/blob/master/ESP32_AP-Flasher/platformio.ini#L441

And after flashing that the file system itself needs to be flashed as well via the PlatformIO "Upload Filesystem Image" button then it is the same state as if flashed via the WebFlasher

=== Case ===
Nemo's version: 
[[File:Testen en printen.png|400px]] 
https://www.printables.com/model/1133397-nemo-de-beun-epaper-access-point-case 

== Links ==
Main wiki:
https://github.com/OpenEPaperLink/OpenEPaperLink 
List of most AP's
https://github.com/OpenEPaperLink/OpenEPaperLink/wiki/Building-an-Access-Point

User:Wheeze NL

2025-01-05T14:50:04Z

Wheeze NL: /* Buiten deze wiki */

== Contact ==
* IRC: Libera.chat, Wheeze_NL
* Matrix: @lennart:wheeze.nl
* Signal
* Threema
* Telefoon
* SMS

==Huidige projecten==

([https://revspace.nl/index.php?title=User:Wheeze_NL&action=purge refresh]):
{{#ask:[[Category:Project]] [[Project Contact::Wheeze_NL]] AND [[Project Status::Initializing]] OR [[Project Status::In progress]]
|mainlabel=Project
|?Project Status=Status
|?Project Last Update=Laatste update
|format=table
|limit=9001
|headers=show
|link=all
|sort=Project Last Update,Project Name
|order=descending, ascending
|offset=0
}}

== Gedane zaken (die geen keer nemen?) ==

{{#ask:[[Category:Project]] [[Project Contact::Wheeze_NL]] AND [[Project Status::Completed]] OR [[Project Status::Abandoned]] OR [[Project Status::Stalled]]
|mainlabel=Project
|?Project Status=Status
|?Project Last Update=Laatste update
|format=table
|limit=9001
|headers=show
|link=all
|sort=Project Last Update,Project Name
|order=descending, ascending
|offset=0
}}

== Buiten deze wiki ==

Ik ben bezig met het implementeren van Revbank bij de Dordtse Elektronica Club in Dordrecht.
Met leuke features zoals
* Bonnetjes printen als er een frituur-bestelling word gedaan.
* Meldingen via Telegram bij transacties.
* De mogelijkheid om je saldo op te kunnen vragen & opwaarderen via een geauthenticeerd kanaal, zoals dit bijvoorbeeld ook bij Revspace kan op IRC.

User:Bas

2025-01-05T14:46:08Z

Wheeze NL: /* Voltooide en gestopte projecten */

{{Smoel
|Name=Bas
|Nick=Bas
|Tagline=Ajeto!
}}
Knutselaar. Ik 3dprint graag, bouw kasten en doe veel met elektronica.

==Topics op het forum==
Ik zet niet alles op de wiki, maar ik post wel heel veel op het forum!

https://forum.revspace.nl/u/bas/activity/topics

==Huidige projecten==
Ik bouw veel gekke dingen, hieronder een beperkt overzichtje. ([https://revspace.nl/index.php?title=User:Bas&action=purge refresh]):
{{#ask:[[Category:Project]] [[Project Contact::Bas]] OR [[Project Contact::Sebastius]] AND [[Project Status::Initializing]] OR [[Project Status::In progress]]
|mainlabel=Project
|?Project Status=Status
|?Project Last Update=Laatste update
|format=table
|limit=9001
|headers=show
|link=all
|sort=Project Last Update,Project Name
|order=descending, ascending
|offset=0
}}

==Voltooide en gestopte projecten==
Soms is het klaar, soms ben je er klaar mee :)

{{#ask:[[Category:Project]] [[Project Contact::Bas]] OR [[Project Contact::Sebastius]] AND [[Project Status::Completed]] OR [[Project Status::Abandoned]] OR [[Project Status::Stalled]]
|mainlabel=Project
|?Project Status=Status
|?Project Last Update=Laatste update
|format=table
|limit=9001
|headers=show
|link=all
|sort=Project Last Update,Project Name
|order=descending, ascending
|offset=0
}}

*[[ESP8266]] - Documentatie / ervaringen met de ESP8266 micocontroller
*[[Sparkshackpowerplant]] - De elektrische installatie van de Sparkshack 2
(zie voor de rest mijn blog)

=oude info=
==Blog==
Veel van mijn technische avonturen schrijf ik op mijn Tweakblog bij Tweakers.net: http://knutselblog.tweakblogs.net

==Artikelen voor Tweakers==
Ik schreef ook eens per maand een artikel voor de frontpage van Tweakers, in de rubriek 'Hardware 112':

*[http://tweakers.net/reviews/4117/hardware-112-tweaker-sebastius-helpt-je-uit-de-brand.html 112 iMac repair]
*[http://tweakers.net/reviews/4196/hardware-112-lego-mindstorms.html 112 Lego Mindstorms]

==Workshops en talks==
*[[Workshop_ESP8266]]
*[[Workshop_printjes_ontwerpen_in_Eagle]]
*[http://hackerhotel.sigio.nl/2016/Day2/HH16%20-%2007%20-%20Bas%20Oort%20--%20Can%20We%20Fix%20It.webm HackerHotel - Can we fix it?]
*[http://hackerhotel.sigio.nl/2016/Day2/HH16%20-%2007%20-%20Bas%20Oort%20--%20Can%20We%20Fix%20It.slides.pdf HackerHotel - Can we fix it slides PDF]

User:Wheeze NL

2025-01-05T14:45:59Z

Wheeze NL:

== Contact ==
* IRC: Libera.chat, Wheeze_NL
* Matrix: @lennart:wheeze.nl
* Signal
* Threema
* Telefoon
* SMS

==Huidige projecten==

([https://revspace.nl/index.php?title=User:Wheeze_NL&action=purge refresh]):
{{#ask:[[Category:Project]] [[Project Contact::Wheeze_NL]] AND [[Project Status::Initializing]] OR [[Project Status::In progress]]
|mainlabel=Project
|?Project Status=Status
|?Project Last Update=Laatste update
|format=table
|limit=9001
|headers=show
|link=all
|sort=Project Last Update,Project Name
|order=descending, ascending
|offset=0
}}

== Gedane zaken (die geen keer nemen?) ==

{{#ask:[[Category:Project]] [[Project Contact::Wheeze_NL]] AND [[Project Status::Completed]] OR [[Project Status::Abandoned]] OR [[Project Status::Stalled]]
|mainlabel=Project
|?Project Status=Status
|?Project Last Update=Laatste update
|format=table
|limit=9001
|headers=show
|link=all
|sort=Project Last Update,Project Name
|order=descending, ascending
|offset=0
}}

== Buiten deze wiki ==

Ik ben bezig met het implementeren van Revbank bij de Dordtse Elektronica Club in Dordrecht.
Met leuke features zoals bonnetjes printen als er een frituur-bestelling word gedaan, meldingen bij transacties en de mogelijkheid om je saldo op te kunnen vragen zoals die bijvoorbeeld ook bij Revspace kan op IRC.