RevSpace - User contributions [en-gb]

Hoera5jaar

2015-01-15T08:19:21Z

Chris:

{{Event
|Name=Verjaardag
|DateStart=24 Jan 2015
|DateEnd=24 Jan 2015
|InfoLocation=Spoorlaan 5d, 2495 AL Den Haag
|InfoOpen=16:00
}}

= RevSpace viert 5-jarig bestaan en dat het 2015 is =

We vieren ons eerste lustrum en claimen uiteraard ook meteen weer de titel "Hackerspaces NL Nieuwjaarsborrel".

= Activiteiten =

* BBQ (In geval van regen in een verwarmde tent)
* Oud-hollandsch PC-kast werpen
* PlasmaPictionary
* Creative Data Destruction @ sparkshack

= Aanmeldingen =

Bij "vlees" en "vega" graag het aantal mee-eters vermelden. Kosten voor het eten: € 7 per persoon. Als je zelf je eten regelt, graag in beide kolommen een "-" neerzetten.

We gaan tot maximaal 200 aanmeldingen ;-)

Zonder wiki-account aanmelden kan ook. Vraag op IRC in #revspace (freenode) of iemand je wil toevoegen, of e-mail naar board@revspace.nl

{| border="1"
|- style="text-decoration: blink;"
! Naam/Nick !! Vlees !! Vega !! Opmerkingen
|-
| Juerd || 1 || - ||
|-
| FooBar || 1 || - ||
|-
| appeltje || 1 || - ||
|-
| benadski || - || 1 ||
|-
| flok || - || 1 ||values of β may give rise to dom
|-
| Dekkers + AngelM || 2 || - ||
|-
| [[Maxell]] || 1 || - ||
|-
| fridgefire || 1 || - ||
|-
| WinSCaP || 2 || - || ?
|-
| Raymii || 1 || - || -
|-
| TuxCrafter (Jelle) || - || - || Indien gewenst kan ik helpen met plantaardige voorbereidingen
|-
| Okkie || - || - || Vega want ik haat planten
|-
| [[User:1Veertje|1Veertje]]||1||-||
|-
| Confis || 2 || - ||
|-
| bigred || 1 || - ||
|-
| Hansm || 1 || - ||
|-
| AK47 || 1 || - ||
|-
| hansg || 1 || - ||
|-
| gmc || - || 1 || Hiep hiep hoera!
|-
| Nissima || 1 || - || sowieso vlees
|-
| realitygaps || 1 || - ||
|-
| gori || 1 || - ||
|-
| Andrey || 1 || - ||
|-
| cmpxchg || 1 || - ||
|-
| effractur || 1 || - ||
|-
| cfw || 1 || - ||
|-
| eightdot || 1 || - ||
|-
| [[Mahjongg]] || 1 || - || Meat eater by design
|-
| Morphje + 1 || 2 || - || vleisch en zelfgemaakte knoflooksaus
|-
| praseodym || 1 || - || 0
|-
| Discharge || 1 || - ||
|-
| Sysop || 1 || - ||
|-
| brainsmoke || 1 || - ||
|-
| polyfloyd || 1 || - ||
|-
| duiv || 1 || - ||
|-
| madeddie || 1 || - ||
|-
| the_Jinx || 1 || - ||
|-
| Realitygaps || 1 || - ||
|-
| ranzbak || - || 1 ||
|-
| Preutje || 1 || - ||
|-
| rogue || 1 || - ||
|-
| fakkelplemp || 1 || - ||
|-
| Chris || 1 || - ||
|}

RevSmoker

2013-06-17T18:52:50Z

Chris:

{{Project
|Name=RevSmoker
|Status=In progress
|Contact=User:Gori
}}

== What ==
Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker.
While the [[BigGreenEggBBQ]] can act as a smoker as well, it has a fairly limited capacity. Furthermore, it can not be electrically operated, which makes temperature control more tricky.

So enter RevSmoker.

== Design ==
The idea is to use a steel drum to build something like [http://www.smokingmeatforums.com/t/115222/my-first-uds-build-pics-included this] but over 9000 times cooler, with electronics and blinkenlights.

The idea is that there is a electric hot plate/heater in the bottom of the drum, that heats a steel box full of wood chips, generating heat and smoke. A micro controller measures the temperature, and drives the hot plate in order to reach a set temperature, that can bet adjusted using a dial. The target and current temperature are displayed on a LCD display. There is a tray at the bottom of the barrel, allowing the heater/wood box to be can be easily removed for refilling, without removing the smoked items.

Design inspiration :
* [http://cruftbox.com/cruft/docs/elecsmoker.html Trashcan smoker]
* [http://www.thepickledpig.com/forums/general-bbq-grilling/832-our-uds-cooker-how-build-one-part-1-a.html Ugly Drum Smoker]
* [http://makeprojects.com/Project/The+Nellie+Bly+Smoker/2619/#.UPlIrZHU424 Alternative, 2 chamber design]
== Parts ==
=== Mechanical ===
==== Have ====
* steel drum that used to hold pineapple juice
** Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L

==== Need ====
* a wood chip box
** square is easy / round can hold more wood
** needs to be created
** Bonus point if the wood chip box can be retrieved from the side through a drawer or door
* one or two grids to hold the dead animal parts being smoked
** Yotson may have hole steel plates
* 3 or 4 handles for top/side
* a BBQ thermometer in through the lid

=== Electronic parts ===
==== Have ====
* an industrial grade brass thermocouple probe keeping track of the temp.
** needs calibration
** ask benadski for the type and specs
* an arduino to measure the temperature, display it on a small LCD screen and control the heater using a relay
* a square gourmet set heater element

==== Need ====
* a 220V relay
* weather proofed power socket enclosure
* a turn knob to adjust the temp
* a weather proof box to hold the electronics
* rgb blinkelights

=== Specs and datasheets ===
* alternative to the large sensor - a TMP36 [https://www.sparkfun.com/products/10988 temp sensor]
* SED1531LCD display to show the current / target temp
** [https://dl.dropbox.com/u/11255141/display_info.pdf LCD datasheet]

=== Software parts ===
* [http://playground.arduino.cc//Code/PIDLibraryRelayOutputExample PID library relay control example]
** [https://www.dropbox.com/s/setane1i2pk1y1h/glcd.txt example code]
** [http://marcovannoord.com/lcd/index.php?title=Hoofdpagina LCD wiki]

== Gallery ==
<gallery>
Image:Handles.jpg| The handles. And yes, that is the carcass of a generic PS/2 ball mouse. ;)
Image:RevSmokerTropiFreeze.JPG| TropiFreeze, Smokin' good pineaple juice!
Image:RevSmokerSparks.JPG|Sparks! At the SparkShack? What a surprise! ;)
Image:RevSmokerHeatingElement.JPG| The heating element is an old gourmet set, inside-out.
Image:RevSmokerMoulinex.jpg|The heating element donor.
Image:RevSmokerPCICardBrackets.JPG| Brackets, PCI slot covers.
Image:RevSmokerSpecs.JPG| Yep, there used to be frozen pineaple from Costa Rica in there once.
Image:SparkShack.jpg| Plaats delict.
Image:RevSmoker_BicycleWheelGrinding.JPG
Image:RevSmoker_Handle.JPG| Double click to open.
Image:RevSmoker_WheelRacks.JPG
Image:RevSmoker_Bottom.JPG
Image:RevSmoker_Whole.JPG
Image:Revsmoker-first-run.jpg
</gallery>

Vleermuisexcursie

2013-04-28T08:19:04Z

Chris: added gallery

{{Event
|Name=Vleermuisexcursie
|DateStart=27 April 2013
|DateEnd=27 April 2013
|Contact=User:Bertrik_Sikken
|Info=Avond met batdetector naar buiten
|InfoLocation=ContactAndRoute|RevSpace
|InfoOpen=21:00-23:30
|InfoTicket=gratis
}}

==Planning==
Basisopzet excursie:
* Een halfuurtje algemene intro over vleermuizen in Nederland, met nadruk op de vleermuisgeluiden die je waarschijnlijk kan gaan horen met de batdetector
* Wanneer het donker wordt (ca. 21:30 uur), buiten wandelen met batdetector, van spoorlaan naar bijvoorbeeld [http://goo.gl/maps/Dis3l park Vreugd en Rust]. Al wandelend kan ik eventuele vragen beantwoorden.
* Als afsluiter opgenomen geluiden bekijken op PC en determineren welke soort(en) we gehoord hebben.

==Aanmelden==
Voeg je naam aan onderstaande lijst toe:

Aanwezigen: [[User:Bertrik_Sikken|bertrik]], [[User:Maxell|Maxell]], Trashman, [[User:Ralph Benadski|benadski]], [[Gori]], [[User:Chris|Chris]]...?

Ik stel een maximum van 15 deelnemers voor, bij veel opkomst kunnen we een tweede excursie plannen.

==Foto's==
<gallery>
Image:Vliermuisexcursie_1.jpg
Image:Vleermuisexcursie_2.jpg
Image:Vleermuisexcursie_3.jpg
Image:Vleermuisexcursie_4.jpg
Image:Vleermuisexcursie_5.jpg
</gallery>

File:Vleermuisexcursie 5.jpg

2013-04-28T08:16:38Z

Chris:

File:Vleermuisexcursie 4.jpg

2013-04-28T08:16:28Z

Chris:

File:Vleermuisexcursie 3.jpg

2013-04-28T08:16:18Z

Chris:

File:Vleermuisexcursie 2.jpg

2013-04-28T08:16:05Z

Chris:

File:Vliermuisexcursie 1.jpg

2013-04-28T08:14:17Z

Chris:

RevSmoker

2013-04-26T22:30:47Z

Chris:

File:RevSmoker Whole.JPG

2013-04-26T22:29:05Z

Chris:

File:RevSmoker Bottom.JPG

2013-04-26T22:27:48Z

Chris:

File:RevSmoker WheelRacks.JPG

2013-04-26T22:27:14Z

Chris:

File:RevSmoker Handle.JPG

2013-04-26T22:26:47Z

Chris:

File:RevSmoker BicycleWheelGrinding.JPG

2013-04-26T22:26:14Z

Chris:

Vleermuisexcursie

2013-04-26T07:22:33Z

Chris:

{{Event
|Name=Vleermuisexcursie
|DateStart=27 April 2013
|DateEnd=27 April 2013
|Contact=User:Bertrik_Sikken
|Info=Avond met batdetector naar buiten
|InfoLocation=ContactAndRoute|RevSpace
|InfoOpen=20:30-23:00
|InfoTicket=gratis
}}

==Planning==
Basisopzet excursie:
* Een halfuurtje algemene intro over vleermuizen in Nederland, met nadruk op de vleermuisgeluiden die je waarschijnlijk kan gaan horen met de batdetector
* Wanneer het donker wordt (ca. 21:00 uur), buiten wandelen met batdetector, van spoorlaan naar bijvoorbeeld [http://goo.gl/maps/Dis3l park Vreugd en Rust]. Al wandelend kan ik eventuele vragen beantwoorden.
* Als afsluiter opgenomen geluiden bekijken op PC en determineren welke soort(en) we gehoord hebben.

Bij regen: ik neem een vleermuisgeluidafspeler mee, zodat je alsnog met een batdetector kan spelen/oefenen.

==Aanmelden==
Voeg je naam aan onderstaande lijst toe:

Aanwezigen: [[User:Bertrik_Sikken|bertrik]], [[User:Maxell|Maxell]], Trashman, [[User:Ralph Benadski|benadski]], [[Gori]], [[User:Chris|Chris]]...?

Ik stel een maximum van 15 deelnemers voor, bij veel opkomst kunnen we een tweede excursie plannen.

==TODO==
* Ruimte reserveren (+ beamer en geluid?)
* Presentatie maken
* Vleermuisgeluidafspeler + geschikte geluidjes voorbereiden
* etc.

HAB launch

2013-04-01T10:36:24Z

Chris: adding panoramas created from youtube video

{{Event
|Name=HAB launch: Hyperion/Habanero
|DateStart=2 March 2013
|DateEnd=2 March 2013
|Contact=User:Costyn_van_Dongen
|Info=Voorbereidingen rond 10:00
|InfoLocation=ContactAndRoute|RevSpace
}}
[[File:ContrailsHAB.jpg|300px|]]

Zaterdag rond 10:00 beginnen we met de voorbereidingen en we verwachten tussen 11:00
en 12:00 'm los te laten.

Hij zal dan anderhalf uur bezig zijn met klimmen tot 35KM hoog, daarna
klapt ie, en komt de payload (met gps tracker en camera) onder
parachute weer naar beneden (terug naar beneden duurt ongeveer 45
minuten).

Ondertussen zullen Rob, Jeroen en Costyn er met de auto achter aan rijden om 'm op
te pikken waar die geland is. Hij zal hemelsbreed gemiddeld zo'n 100km
afleggen.

Iedereen die geïnteresseerd is, is uitgenodigd om te komen kijken bij
de voorbereidingen en lancering.

=== Pics & movies ===
* Imgur album: [http://imgur.com/a/8JY4w http://imgur.com/a/8JY4w]
* Moving pics allowed! [https://www.youtube.com/watch?v=AKNbJCVRXhA youtu.be/AKNbJCVRXhA]
* [http://hak5.org/episodes/hak5-1404 hak5.org video]
* [http://imgur.com/a/clMUW#0 foto's voorbereiding launch]
* Panoramas created using stills from the youtube video:
[[File:HAB_view_fisheye.jpg|300px]]
[[File:HAB_view_cylindrical.jpg|500px]]

== Telemetry and tracking ==
=== Flight data ===
* Habanero
** Object Movie of flight path for HABANERO
*** HTML5 version [http://360.g8dhe.net/HAB_Flights/HABANERO/output/HABANERO_1.html]
*** Flash version [http://360.g8dhe.net/HAB_Flights/HABANERO/output/HABANERO.html]
* Hyperion
** [http://habitat.habhub.org/habitat/ all telemetry data]

* Our very own [[HAB Tracker Station]]
* [http://spacenear.us/tracker/ Watch the telemetry live!]
* [http://habhub.org/predict/#!/uuid=1975e7be1a9ee2f5bd93aa4c875f34a5819024ca Trajectory prediction]
* [http://www.ustream.tv/channel/costyn Livestream of setup, launch and chase]
* [http://ukhas.org.uk/ukhas:irc_channel chat on IRC] #highaltitude on freenode

== Payload details ==
=== Hyperion ===
* NTX2 at 10mW
* 434.650 MHz
* 425 shift 50 baud 8n1
* Canon A480 taking pics (hopefully throughout the flight this time)
<gallery>
File:5l1YEh.jpg
</gallery>

----

=== Habanero ===
* small 90g payload using an RFM22b
* 434.250 MHz 460 shift
* 100 baud 8n1
<gallery>
File:HiWznJ9.jpg
</gallery>

== Balloon ==
* 1200g Hwoyee.
* Calculated altitude should be around 35KM for the payload weight.

File:HAB view fisheye.jpg

2013-04-01T10:32:48Z

Chris: Stitched panorama (fisheye projection) from youtube video of high altitude balloon launch, created using Hugin

Stitched panorama (fisheye projection) from youtube video of high altitude balloon launch, created using Hugin

File:HAB view cylindrical.jpg

2013-04-01T10:32:07Z

Chris: Stitched panorama (cylindrical projection) from youtube video of high altitude balloon launch, created using Hugin

Stitched panorama (cylindrical projection) from youtube video of high altitude balloon launch, created using Hugin

RevSmoker

2013-02-27T12:42:05Z

Chris: /* What */

{{Project
|Name=RevSmoker
|Status=In progress
|Contact=User:Gori
}}

== What ==
Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker.
While the [[BigGreenEggBBQ]] can act as a smoker as well, it has a fairly limited capacity. Furthermore, it can not be electrically operated, which makes temperature control more tricky.

So enter RevSmoker.

== Design ==
The idea is to use a steel drum to build something like [http://www.smokingmeatforums.com/t/115222/my-first-uds-build-pics-included this] but over 9000 times cooler, with electronics and blinkenlights.

The idea is that there is a electric hot plate/heater in the bottom of the drum, that heats a steel box full of wood chips, generating heat and smoke. A micro controller measures the temperature, and drives the hot plate in order to reach a set temperature, that can bet adjusted using a dial. The target and current temperature are displayed on a LCD display. There is a tray at the bottom of the barrel, allowing the heater/wood box to be can be easily removed for refilling, without removing the smoked items.

Design inspiration :
* [http://cruftbox.com/cruft/docs/elecsmoker.html Trashcan smoker]
* [http://www.thepickledpig.com/forums/general-bbq-grilling/832-our-uds-cooker-how-build-one-part-1-a.html Ugly Drum Smoker]
* [http://makeprojects.com/Project/The+Nellie+Bly+Smoker/2619/#.UPlIrZHU424 Alternative, 2 chamber design]
== Parts ==
=== Mechanical ===
==== Have ====
* steel drum that used to hold pineapple juice
** Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L

==== Need ====
* a wood chip box
** square is easy / round can hold more wood
** needs to be created
** Bonus point if the wood chip box can be retrieved from the side through a drawer or door
* one or two grids to hold the dead animal parts being smoked
** Yotson may have hole steel plates
* 3 or 4 handles for top/side
* a BBQ thermometer in through the lid

=== Electronic parts ===
==== Have ====
* an industrial grade brass thermocouple probe keeping track of the temp.
** needs calibration
** ask benadski for the type and specs
* an arduino to measure the temperature, display it on a small LCD screen and control the heater using a relay
* a square gourmet set heater element

==== Need ====
* a 220V relay
* weather proofed power socket enclosure
* a turn knob to adjust the temp
* a weather proof box to hold the electronics
* rgb blinkelights

=== Specs and datasheets ===
* alternative to the large sensor - a TMP36 [https://www.sparkfun.com/products/10988 temp sensor]
* SED1531LCD display to show the current / target temp
** [https://dl.dropbox.com/u/11255141/display_info.pdf LCD datasheet]

=== Software parts ===
* [http://playground.arduino.cc//Code/PIDLibraryRelayOutputExample PID library relay control example]
** [https://www.dropbox.com/s/setane1i2pk1y1h/glcd.txt example code]
** [http://marcovannoord.com/lcd/index.php?title=Hoofdpagina LCD wiki]

== Gallery ==
<gallery>
Image:SparkShack.jpg|
Image:RevSmokerMoulinex.jpg|
Image:RevSmokerTropiFreeze.JPG|
Image:RevSmokerSparks.JPG|
Image:RevSmokerHeatingElement.JPG|
Image:RevSmokerPCICardBrackets.JPG|
Image:RevSmokerSpecs.JPG|
</gallery>

RevSmoker

2013-02-27T12:41:50Z

Chris:

{{Project
|Name=RevSmoker
|Status=In progress
|Contact=User:Gori
}}

== What ==
Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker.
While the [[BigGreenEggBBQ]] can act as a smoker as well, it has a fairly limited capacity. Furhtermore, it can not be electrically operated, which makes temperature control more tricky.

So enter RevSmoker.

== Design ==
The idea is to use a steel drum to build something like [http://www.smokingmeatforums.com/t/115222/my-first-uds-build-pics-included this] but over 9000 times cooler, with electronics and blinkenlights.

The idea is that there is a electric hot plate/heater in the bottom of the drum, that heats a steel box full of wood chips, generating heat and smoke. A micro controller measures the temperature, and drives the hot plate in order to reach a set temperature, that can bet adjusted using a dial. The target and current temperature are displayed on a LCD display. There is a tray at the bottom of the barrel, allowing the heater/wood box to be can be easily removed for refilling, without removing the smoked items.

Design inspiration :
* [http://cruftbox.com/cruft/docs/elecsmoker.html Trashcan smoker]
* [http://www.thepickledpig.com/forums/general-bbq-grilling/832-our-uds-cooker-how-build-one-part-1-a.html Ugly Drum Smoker]
* [http://makeprojects.com/Project/The+Nellie+Bly+Smoker/2619/#.UPlIrZHU424 Alternative, 2 chamber design]
== Parts ==
=== Mechanical ===
==== Have ====
* steel drum that used to hold pineapple juice
** Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L

==== Need ====
* a wood chip box
** square is easy / round can hold more wood
** needs to be created
** Bonus point if the wood chip box can be retrieved from the side through a drawer or door
* one or two grids to hold the dead animal parts being smoked
** Yotson may have hole steel plates
* 3 or 4 handles for top/side
* a BBQ thermometer in through the lid

=== Electronic parts ===
==== Have ====
* an industrial grade brass thermocouple probe keeping track of the temp.
** needs calibration
** ask benadski for the type and specs
* an arduino to measure the temperature, display it on a small LCD screen and control the heater using a relay
* a square gourmet set heater element

==== Need ====
* a 220V relay
* weather proofed power socket enclosure
* a turn knob to adjust the temp
* a weather proof box to hold the electronics
* rgb blinkelights

=== Specs and datasheets ===
* alternative to the large sensor - a TMP36 [https://www.sparkfun.com/products/10988 temp sensor]
* SED1531LCD display to show the current / target temp
** [https://dl.dropbox.com/u/11255141/display_info.pdf LCD datasheet]

=== Software parts ===
* [http://playground.arduino.cc//Code/PIDLibraryRelayOutputExample PID library relay control example]
** [https://www.dropbox.com/s/setane1i2pk1y1h/glcd.txt example code]
** [http://marcovannoord.com/lcd/index.php?title=Hoofdpagina LCD wiki]

== Gallery ==
<gallery>
Image:SparkShack.jpg|
Image:RevSmokerMoulinex.jpg|
Image:RevSmokerTropiFreeze.JPG|
Image:RevSmokerSparks.JPG|
Image:RevSmokerHeatingElement.JPG|
Image:RevSmokerPCICardBrackets.JPG|
Image:RevSmokerSpecs.JPG|
</gallery>

RevSmoker

2013-02-27T12:41:17Z

Chris:

{{Project
|Name=RevSmoker
|Status=In progress
|Contact=User:Gori
}}

== What ==
Because smoked dead animals are at least as tasty as BBQed dead animals, we need to have a nice smoker.
While the [[BigGreenEggBBQ]] can act as a smoker as well, it has a fairly limited capacity. Furhtermore, it can not be electrically operated, which makes temperature control more tricky.

So enter RevSmoker.

== Design ==
The idea is to use a steel drum to build something like [http://www.smokingmeatforums.com/t/115222/my-first-uds-build-pics-included this] but over 9000 times cooler, with electronics and blinkenlights.

The idea is that there is a electric hot plate/heater in the bottom of the drum, that heats a steel box full of wood chips, generating heat and smoke. A micro controller measures the temperature, and drives the hot plate in order to reach a set temperature, that can bet adjusted using a dial. The target and current temperature are displayed on a LCD display. There is a tray at the bottom of the barrel, allowing the heater/wood box to be can be easily removed for refilling, without removing the smoked items.

Design inspiration :
* [http://cruftbox.com/cruft/docs/elecsmoker.html Trashcan smoker]
* [http://www.thepickledpig.com/forums/general-bbq-grilling/832-our-uds-cooker-how-build-one-part-1-a.html Ugly Drum Smoker]
* [http://makeprojects.com/Project/The+Nellie+Bly+Smoker/2619/#.UPlIrZHU424 Alternative, 2 chamber design]
== Parts ==
=== Mechanical ===
==== Have ====
* steel drum that used to hold pineapple juice
** Inside dimensions: D: 57 cm, H: 85 cm, Volume approx. 218 L

==== Need ====
* a wood chip box
** square is easy / round can hold more wood
** needs to be created
** Bonus point if the wood chip box can be retrieved from the side through a drawer or door
* one or two grids to hold the dead animal parts being smoked
** Yotson may have hole steel plates
* 3 or 4 handles for top/side
* a BBQ thermometer in through the lid

=== Electronic parts ===
==== Have ====
* an industrial grade brass thermocouple probe keeping track of the temp.
** needs calibration
** ask benadski for the type and specs
* an arduino to measure the temperature, display it on a small LCD screen and control the heater using a relay
* a square gourmet set heater element

==== Need ====
* a 220V relay
* weather proofed power socket enclosure
* a turn knob to adjust the temp
* a weather proof box to hold the electronics
* rgb blinkelights

=== Specs and datasheets ===
* alternative to the large sensor - a TMP36 [https://www.sparkfun.com/products/10988 temp sensor]
* SED1531LCD display to show the current / target temp
** [https://dl.dropbox.com/u/11255141/display_info.pdf LCD datasheet]

=== Software parts ===
* [http://playground.arduino.cc//Code/PIDLibraryRelayOutputExample PID library relay control example]
** [https://www.dropbox.com/s/setane1i2pk1y1h/glcd.txt example code]
** [http://marcovannoord.com/lcd/index.php?title=Hoofdpagina LCD wiki]

== Gallery ==
<gallery>
Image::SparkShack.jpg|
Image::RevSmokerMoulinex.jpg|
Image::RevSmokerTropiFreeze.JPG|
Image::RevSmokerSparks.JPG|
Image::RevSmokerHeatingElement.JPG|
Image::RevSmokerPCICardBrackets.JPG|
Image::RevSmokerSpecs.JPG|
</gallery>

File:RevSmokerSpecs.JPG

2013-02-27T12:38:08Z

Chris:

File:RevSmokerPCICardBrackets.JPG

2013-02-27T12:35:43Z

Chris:

File:RevSmokerHeatingElement.JPG

2013-02-27T12:34:20Z

Chris:

File:RevSmokerSparks.JPG

2013-02-27T12:33:29Z

Chris:

File:RevSmokerTropiFreeze.JPG

2013-02-27T12:32:45Z

Chris:

File:RevSmokerMoulinex.jpg

2013-02-27T12:31:59Z

Chris: uploaded a new version of "File:RevSmokerMoulinex.jpg"

File:RevSmokerMoulinex.jpg

2013-02-27T12:29:39Z

Chris: uploaded a new version of "File:RevSmokerMoulinex.jpg"

File:RevSmokerMoulinex.jpg

2013-02-27T12:27:58Z

Chris:

File:SparkShack.jpg

2013-02-27T12:27:00Z

Chris: